Abstract:Global Navigation Satellite System (GNSS) is a tool that can assist community activities, especially in navigation and positioning for mapping surveys. This tool has an accuracy of up to millimeters for determining the position of latitude and longitude, but to get this accuracy requires an expensive cost, which is more than 200 million rupiah. Currently the development of GNSS receivers is very rapid, one of which is a low-cost GNSS product. The advantages of this receiver are that it has a low cost, light weight and an accuracy of up to centimeters for determining latitude and longitude positions. In this study, we have conducted trials using a low-cost GNSS receiver from several products such as U-blox, Trimble, and Comnav. For products from U-blox in this study, the F9P and F9R series were used. The F9R series is one of the receivers that has been integrated with the inertial measurement unit (IMU)/inertial navigation system (INS), the benefit of this integration is to improve position accuracy when data collection using the kinematic method. Products from U-blox have position accuracy below 1 meter. Meanwhile, the series used in Trimble and Comnav products are Trimble BD982 and Comnav Oem Board K708 which have accuracy below 1 centimeter. The purpose of this activity is to compare all these receivers by using Comnav OEM Board K708 data as validation data. Several parameters in this study will be analyzed such as the number of satellites obtained by the receiver, position accuracy and various other analyzes. The measurement methods that will be carried out in this study are static differential and Real Time Kinematic (RTK) measurements that utilize direct corrections from Continuously Operating Reference Stations (CORS) and deformation observations. The results of the first analysis obtained in this activity are the number of satellites obtained by the U-blox F9 series receiver which is more stable to receive satellites, namely as many as 24-29 satellites, then Trimble BD982 as many as 2-32 satellites, and Comnav K708 receivers as many as 3-28 satellites. Meanwhile, the Dilution Of Precision (DOP) values for 4 receivers, namely K708, F9P, and F9R, have stable values ranging from 0.5-1 compared to the BD982 receiver which fluctuated in several observation epochs, especially in the last observation epoch. In observations using the static differential method, using corrections from CORS for positioning this receiver can be used because the difference in position data is in the range of 0.009 m - 0.040 m from reference data (receiver K708). Meanwhile, the data receiver that has been integrated with IMU/INS (F9R) kinematic method has the smallest position difference value (K708) compared to other receivers, which is from 0.001 m - 8.091 m. In testing for deformation measurements, further research needs to be done because the data obtained is still in the form of a simulation.

Performance of low-cost GNSS equipment in monitoring of horizontal displacements

Low-Cost GNSS Receivers for Local Monitoring: Experimental Simulation, and Analysis of Displacements

The Real-Time Detection of Vertical Displacements by Low-Cost GNSS Receivers Using Precise Point Positioning

Low-Cost Dual-Frequency GNSS Receivers and Antennas for Surveying in Urban Areas

Performance of Low-Cost GNSS in Structural Health Monitoring Studies: Shake Table Tests

Feasibility of Using Low-Cost Dual-Frequency GNSS Receivers for Land Surveying

Multi-GNSS high-rate RTK, PPP and novel direct phase observation processing method: application to precise dynamic displacement detection

Low-Cost GNSS and PPP-RTK: Investigating the Capabilities of the u-blox ZED-F9P Module

Low Cost GNSS Trimble BD982 and U-blox Performance Test Analysis F9 Series for Several Measurement Methods (Case Study: Sidoarjo Regency)

Detection of Structural Vibration with High-Rate Precise Point Positioning: Case Study Results Based on 100 Hz Multi-GNSS Observables and Shake-Table Simulation

Experimental Study of Accuracy of High-Rate GNSS in Context of Structural Health Monitoring

Sub-meter-level navigation with an enhanced multi-GNSS single-point positioning algorithm using iGMAS ultra-rapid products

Assessment of the Real-Time and Rapid Precise Point Positioning Performance Using Geodetic and Low-Cost GNSS Receivers

Low-Cost Single-Frequency DGNSS/DBA Combined Positioning Research and Performance Evaluation

Feasibility Analysis of the Performance of Low-Cost Gnss Receivers in Monitoring Dynamic Motion

On the accuracy of low-cost dual-frequency GNSS network receivers and reference data

Experimental Evaluation of Smartphone Accelerometer and Low-Cost Dual Frequency GNSS Sensors for Deformation Monitoring

On the applicability of low-cost GNSS antennas to precise surveying applications

Evaluation of the Performance of Online GPS/GNSS Data Processing Services for Monitoring the Land Deformations and Movements

A Test on the Potential of a Low Cost Unmanned Aerial Vehicle RTK/PPK Solution for Precision Positioning

Intercomparison of multi-GNSS signals characteristics acquired by a low-cost receiver connected to various low-cost antennas