Abstract:We report a simple, scalable two-step method for direct-write laser fabrication of 3D, porous graphene-like carbon electrodes from polyimide films with integrated contact plugs to underlying metal layers (Au or Ni). Irradiation at high average CO2laser power (30 W) and low scan speed (∼18 mm s)-1leads to formation of 'keyhole' contact plugs through local ablation of polyimide (initial thickness 17μm) and graphitization of the plug perimeter wall. Top-surface laser-induced graphene (LIG) electrodes are then formed and connected to the plug by raster patterning at lower laser power (3.7 W) and higher scan speed (200 mm s)-1. Sheet resistance data (71 ± 15 Ω sq.)-1indicates formation of high-quality surface LIG, consistent with Raman data which yield sharp first- and second-order peaks. We have also demonstrated that high-quality LIG requires a minimum initial polyimide thickness. Capacitance data measured between surface LIG electrodes and the buried metal film indicate a polyimide layer of thickness ∼7μm remaining following laser processing. By contrast, laser graphitization of polyimide of initial thickness ∼8μm yielded devices with large sheet resistance (>1 kΩ sq.)-1. Raman data also indicated significant disorder. Plug contact resistance values were calculated from analysis of transfer line measurement data for single- and multi-plug test structures. Contacts to buried nickel layers yielded lower plug resistances (1-plug: 158 ± 7 Ω , 4-plug: 31 ± 14 Ω) compared to contacts to buried gold (1-plug: 346 ± 37 Ω , 4-plug: 52 ± 3 Ω). Further reductions are expected for multi-plug structures with increased areal density. Proof-of-concept mm-scale LIG electrochemical devices with local contact plugs yielded rapid electron transfer kinetics (rate constantk0 ∼ 0.017 cm s-1), comparable to values measured for exposed Au films (k0 ∼0.023 cm s)-1. Our results highlight the potential for integration of LIG-based sensor electrodes with semiconductor or roll-to-roll manufacturing.

Laser induced 3D porous graphene dots: Bottom-up growth mechanism, multi-physics coupling effect and surface wettability

Laser‐Induced Graphene: From Discovery to Translation

Investigation of micro/nano formation mechanism of porous graphene induced by CO2 laser processing on polyimide film

Laser-induced Jigsaw-Like Graphene Structure Inspired by Oxalis Corniculata Linn. Leaf

Laser-Induced Graphene: Synthesis Advances, Structural Tailoring, Enhanced Properties, and Sensing Applications

Research Progress of Laser-Induced Graphene Technology

3D‐laminated Graphene with Combined Laser Irradiation and Resin Infiltration Toward Designable Macrostructure and Multifunction

Laser-Induced Freestanding Graphene Papers: A New Route of Scalable Fabrication with Tunable Morphologies and Properties for Multifunctional Devices and Structures.

Facile Fabrication of Super-Hydrophilic Porous Graphene with Ultra-Fast Spreading Feature and Capillary Effect by Direct Laser Writing

Recent Advances in Laser‐Induced Graphene: Mechanism, Fabrication, Properties, and Applications in Flexible Electronics

One-step laser induced conversion of a gelatin-coated polyimide film into graphene: Tunable morphology, surface wettability and microsupercapacitor applications

A Comparative Study of Laser-Induced Graphene by CO2 Infrared Laser and 355 nm Ultraviolet (UV) Laser

A review of laser-induced graphene: From experimental and theoretical fabrication processes to emerging applications

Laser-induced porous graphene films from commercial polymers

Direct-write formation of integrated bottom contacts to laser-induced graphene-like carbon

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabrication of Micron-Structured Heatable Graphene Hydrophobic Surfaces for Deicing and Anti-Icing by Laser Direct Writing

Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams

In Situ Formation of Phosphorus-Doped Porous Graphene Via Laser Induction

Effect of laser power on the structure and specific surface area of laser-induced graphene

Laser Directed Lithography Of Asymmetric Graphene Ribbons On A Polydimethylsiloxane Trench Structure