Abstract:Plastic freeforming (PF) is an additive-manufacturing process for producing three-dimensional plastic parts based on 3D CAD data by applying plastic droplets in layers. This process is used to produce customer-specific and complex geometries (prototypes and small series) on organic sheets. A comparable serial process is the injection of a second component onto organic sheets by injection molding. A sufficient bond between the PF structure and the organic sheets is of particular importance for each application. If this is not guaranteed, the composite system cannot withstand the mechanical load and fails. The force exerted on the system can no longer be transmitted between the PF structure and the organic sheet. The organic sheet is made of glass fiber-reinforced polypropylene (PP). The connection between the organic sheet and the PF structure is achieved by welding the molten polymer droplets and the surface of the organic sheet. The PF structures are made of PP to ensure sufficient compatibility with regard to the weldability of the components. The processing of PP in the PF process is a challenge because PP is a semi-crystalline material. The shrinkage of semi-crystalline materials is significantly higher compared to amorphous materials. Due to the layered structure of the components, the shrinkage of the individual layers results in undesired warpage. The adhesive strength between the organic sheet and the PF structure is investigated by determining the bending strength in the 3-point bending test. The investigations include an optimization of the process parameters to maximize the adhesive strength. The experimental investigations show that an increase of the nozzle and build chamber temperature leads to a higher adhesive strength. In further investigations, the temperature of the nozzle shows no significant influence on the surface temperature despite the expected heat radiation. The surface temperature is almost only dependent on the temperature of the build chamber.

Submerged ultrasonic plastic welding: A computational and experimental investigation

Advances in Ultrasonic Welding of Thermoplastic Composites: A Review

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Investigation of ultrasonic welding of carbon fiber reinforced thermoplastic to an aluminum alloy using a interfacial coating

Ultrasonic Welding of Acrylonitrile-Butadiene-Styrene Thermoplastics without Energy Directors

Ultrasonic welding of CF/PA6 composite to 6061Al alloy utilizing an interfacial coating as energy director

Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development

A study on ultrasonic welding of thermoplastics with significant differences in physical properties under different process parameters

Underwater dissimilar friction stir lap welding of aluminum alloy and CFRTP

A Combined RSM – FEM Analysis of Weld Quality in Laser Transmission Welding of Plastics

Investigations on friction stir spot welding to overcome bed size limits of material extrusion (MEX) 3D printers

A numerical analysis of an energy directing method through friction heating during the ultrasonic welding of thermoplastic composites

Laser Welding Process in PP Molding Parts: Evaluation of Seam Performance

Optimisation of ultrasonic welding process of carbon/epoxy composites using Nylon-based or PES thermoplastic interlayers

On the Influence of Welding Parameters and Their Interdependence During Robotic Continuous Ultrasonic Welding of Carbon Fibre Reinforced Thermoplastics

Ultrasonically welded and non-welded polypropylene and PC-ABS blend thermal analysis

Experimental and Numerical Investigation of the Use of Ultrasonic Waves to Assist Laser Welding

Effect of Preheating Parameters on Extrusion Welding of High-Density Polyethylene Materials

Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites

Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool

Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites