Abstract:Rotary friction welding (RFW) could result in lower welding temperature, energy consumption, or environmental effects as compared with fusion welding processes. RFW is a green manufacturing technology with little environmental pollution in the field of joining methods. Thus, RFW is widely employed to manufacture green products. In general, the welding quality of welded parts, such as tensile strength, bending strength, and surface hardness is affected by the peak temperature in the weld joint during the RFW of dissimilar plastic rods. However, hitherto little is known about the domain knowledge of RFW of acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) polymer rods. To prevent random efforts and energy consumption, a green method to predict the peak temperature in the weld joint of dissimilar RFW of ABS and PC rods was proposed. The main objective of this work is to investigate the peak temperature in the weld joint during the RFW using COMSOL multiphysics software for establishing an empirical technical database of RFW of dissimilar polymer rods under different rotational speeds. The main findings include that the peak temperature affecting the mechanical properties of RFW of PC and ABS can be determined by the simulation model proposed in this work. The average error of predicting the peak temperature using COMSOL software for five different rotational speeds is about 15 °C. The mesh element count of 875,688 is the optimal number of meshes for predicting peak temperature in the weld joint. The bending strength of the welded part (y) using peak welding temperature (x) can be predicted by the equation of y = −0.019 x2 + 5.081x − 200.75 with a correlation coefficient of 0.8857. The average shore A surface hardness, impact energy, and bending strength of the welded parts were found to be increased with increasing the rotational speed of RFW.

A numerical analysis of an energy directing method through friction heating during the ultrasonic welding of thermoplastic composites

Ultrasonic welding of CF/PA6 composite to 6061Al alloy utilizing an interfacial coating as energy director

Nonlinear friction behavior in ultrasonic welding of aluminum alloy to carbon fiber reinforced PA6 composite

On the Influence of Welding Parameters and Their Interdependence During Robotic Continuous Ultrasonic Welding of Carbon Fibre Reinforced Thermoplastics

A Study on Through-the-Thickness Heating in Continuous Ultrasonic Welding of Thermoplastic Composites

Static ultrasonic welding of carbon fibre unidirectional thermoplastic materials and the influence of heat generation and heat transfer

Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development

Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method

Nonlinear Dynamics of Friction Heating in Ultrasonic Welding

Effect of Adherend Thickness on Near-Field Ultrasonic Welding of Single-Lap CF/LMPAEK Thermoplastic Composite Joints

Continuous ultrasonic welding of thermoplastic composites: Enhancing the weld uniformity by changing the energy director

Numerical Study of Contact Behavior and Temperature Characterization in Ultrasonic Welding of CF/PA66

A numerical model for the thermoplastic welding process

Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties

High Pressure–Amplitude Ratio Ultrasonic Spot Welding of Thermoplastic Carbon Fiber‐Reinforced Epoxy

Ultrasonic welding of metal to fiber-reinforced thermoplastic composites: A review

Multi-Timescale Simulations of Temperature Elevation for Ultrasonic Welding of CFRP with Energy Director

Thermo Mechanical Analysis of Ultrasonic Welding of Metal Joints under Different Control Parameters

Investigation of ultrasonic welding of carbon fiber reinforced thermoplastic to an aluminum alloy using a interfacial coating

Ultrasonic Welding of Acrylonitrile-Butadiene-Styrene Thermoplastics without Energy Directors

Experimentation and Numerical Modeling of Peak Temperature in the Weld Joint during Rotary Friction Welding of Dissimilar Plastic Rods