Abstract:This study systematically investigates the influence of the cross-sectional aspect ratio (B/H) and four different aerodynamic mitigation measures, i.e., the fairing, lower central stability plate, inverted L-shaped edge plate, and lower horizontal edge plate, on the performance of cable-stayed bridges, with π-typed composite deck, i.e., π section, due to vortex-induced vibrations (VIV). The study utilized wind tunnel tests and limited CFD simulations by varying bridge dimensions. First, based on a survey of existing cable-stayed bridges with the π-typed composite deck, three-section models with different aspect ratios were studied and their corresponding vibration characteristics for the vertical and torsional VIVs were analyzed. Then, the vibration suppression effects of mitigation measures with several variants in shape were investigated to determine an effective mitigation measure, i.e., with favorable aerodynamic stability, for the π section deck. The vibration suppression mechanism for three selected cases was further assessed using numerical simulation. The results show that: (a) for the π section model with the aspect ratio in the range of 9.05–11.96, increasing the ratio value will delay the onset wind speed of the vertical and torsional VIVs; (b) In the case of a low ratio of the torsional frequency to vertical bending frequency, there are often special phenomena where the vertical and torsional vibrations coexist. However, a larger aspect ratio would result in more independent vertical and torsional vibrations; (c) Regarding the vibration suppression effect, based on the limited studied cases, a small fairing can be superior to large fairings; (d) Different forms of the lower central stability plate have a good suppression effect on the vertical VIV; (e) The use of inverted L-shaped edge plate with a = <math>23</math>H and b = <math>12</math>H is identified to result in the best vibration suppression for both the vertical and torsional vibrations among the considered mitigation measures, where a and b are the size parameters of the inverted L-shaped edge plate; and (f) The lower horizontal edge plate cannot effectively improve the torsional VIV performance. This study offers guidance on the performance of composite cable-stayed bridge with the π section in isolation and equipped with mitigation measures to aid in the engineering design practice.

Structural Countermeasures Against Aerodynamic Torsional Divergence of a Suspension Bridge with a Main Span of 3[math]000[math]m

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Probabilistic Versus Deterministic Assessment of the Minimum Structural Damping Required to Prevent Galloping of Dry Bridge Hangers

Parametric analysis of the dynamic characteristics of a long-span three-tower self-anchored suspension bridge with a composite girder

Numerical Study on Static Aerodynamic Coefficients Aerodynamic Interference Effects of the Box girder Section of Continuous Rigid Frame Bridge with Close Twin Deck

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Series method for analyzing 3D nonlinear torsional divergence of suspension bridges

Dynamic analyses of long-span cable-stayed and suspension cooperative system bridge under combined actions of wind and regular wave loads

The aerodynamic stability of a new type of Multi-tower cable-stayed bridge with rhombic stiffening cables

Aerostatic stability of long-span cable-stayed bridges: Parametric study

Aerodynamic performance of Π-shaped composite deck cable-stayed bridges including VIV mitigation measures

Numerical Simulation Research Considering the Influence of Bridge Deck Cross Slope on Wind Performance of π-Type Composite Beam Cable-Stayed Bridge with a Symmetric Elevation Arrangement

Analysis of Stiffening Girder Erection Scheme of Single Tower and Single Span Asymmetric Suspension Bridge

Aerodynamics and surrounding flow patterns of a long-span bridge girder model with triple-separated boxes

Control of vortex-induced vibrations of a curved cable-stayed bridge by ECD-TMD

Experimental and numerical studies of the vortex-induced vibration behavior of an asymmetrical composite beam bridge

Buffeting analysis of long-span twin-box cable-stayed bridge during construction

Static Mechanics and Dynamic Analysis and Control of Bridge Structures Under Multi-Load Coupling Effects

Advanced aerostatic stability analysis of cable-stayed bridges using finite-element method

Wind Resistance Performance Assessment of Long-Span Cable-Supported Bridges Based on Time-Varying Reliability Theory