Long-range fiber-based laser Doppler vibrometer using Faraday rotator for polarization-rotation compensation

Shin Arahira,Akihiro Fujii

DOI: https://doi.org/10.1364/oe.524535

IF: 3.8

2024-06-01

Optics Express

Abstract:Shin Arahira, Akihiro Fujii In this paper, we report a method for extending distance of an optical fiber-based laser Doppler vibrometer system. This method uses a ... [Opt. Express 32, 22009-22019 (2024)]

optics

What problem does this paper attempt to address?

Research on Dynamic Performance Evaluation of Fiber Optic Gyroscope Based on Laser Doppler Measurement Technology

Shuai Zhao,Yilan Zhou,Xiaowu Shu

DOI: https://doi.org/10.1117/12.2607026

2021-01-01

Abstract:The bandwidth of the fiber optic gyroscope is an important indicator of its frequency characteristics. When the environmental conditions is under high dynamic such as vibration and sharp turns, the measurement accuracy of fiber optic gyroscope is greatly affected due to the limitation of the frequency characteristics of fiber optic gyroscopes. And the traditional bandwidth measurement method is to record the angular vibration's amplitude and frequency of the turntable and the output of fiber optic gyroscope, and then use the least squares method to obtain the bandwidth of fiber optic gyroscope. However, the output frequency of the turntable's circular grating encoder is not high enough, usually less than 100Hz, which cannot reflect the more comprehensive dynamic performance of the fiber optic gyroscope. And the manual operation test is always cumbersome. All of these limits the further research on the dynamic performance of fiber optic gyroscope. Therefore, this paper proposes a fiber optic gyroscope bandwidth evaluation method based on laser Doppler measurement technology. Then, an adaptive modal decomposition algorithm is proposed, which can adaptively decompose complex nonlinear and non-stationary signals into multiple frequency components. Our system can realize high-frequency, high-precision and non-contact, which is of great significance to the research of the dynamic performance of the fiber optic gyroscope.
All Fiber Real-Time Laser Wavelength Measurement Method Based on Faraday Rotation Effect

enmei shan,yi li,ben xu,changyu shen,chunliu zhao,xinyong dong,shangzhong jin

DOI: https://doi.org/10.1109/LPT.2015.2457943

IF: 2.6

2015-01-01

IEEE Photonics Technology Letters

Abstract:An all fiber real-time laser wavelength measurement method based on Faraday rotation effect is proposed and demonstrated, for correcting the nonlinear tuning of wavelength sweep lasers. The wavelength measurement setup is mainly composed of a specially designed fiber magneto-optic device and a wavelength sensitive filter. When the linearly polarized lights with different wavelengths pass through t...
All-fiber Laser Wavelength Measurement System Based on Two Quadrature Faraday Rotation Devices

Yi Li,Enmei Shan,Juan Kang,Ben Xu,Changyu Shen,Chunliu Zhao,Xinyong Dong

DOI: https://doi.org/10.1109/icocn.2016.7875815

2016-01-01

Abstract:The laser wavelength measurement and tracing in real time is very important in the optical fiber sensing field. The current wavelength measurement methods are mainly based on the interference technique, such as Michelson wavemeters, which are expensive, heavy and slow. In this manuscript, we reported a all-fiber, totally passive, wavelength measurement system base on Faraday rotation devices. This laser wavelength measurement method is composed of specially designed fiber magneto-optic devices and balanced detectors. When the linearly polarized lights with different wavelengths pass through the magneto-optic crystal, their polarization planes will be rotated at different angles, then the light wavelength can be measured by detecting the rotated angles. We also discussed the accuracy improvement solution based on quadrature detection technique.
A Low-Cost and Fast Wavelength Measurement Method Based on Faraday Rotation Effect

Enmei Shan,Yi Li,Ben Xu,Changyu Shen,Chunliu Zhao,Xinyong Dong,Shangzhong Jin

DOI: https://doi.org/10.1109/icocn.2015.7203613

2015-01-01

Abstract:A low-cost and fast wavelength measurement method based on Faraday rotation effect is proposed in this study. This laser wavelength measurement method is mainly performed by a specially designed fiber magneto-optic device and a balanced detector. When the linearly polarized lights with different wavelengths pass through the magneto-optic crystal, their polarization planes will be rotated at different angles, then the light wavelength can be measured by detecting the rotated angles. In our experiments, the highest wavelength resolution can reach 2.1pm within a measurement range of ∼7.8nm. This new method has the advantages of low-cost, compact structure and capability of fast measurements.
Faraday rotation signal amplification using high-power lasers

P.-A. Gourdain,A. Bachmann,I. N. Erez,M. E. Evans,F. Garrett,J. Hraki,H. R. Hasson,S. McGaffigan,I. West-Abdallah,J. R. Young

2023-11-07

Abstract:Magnetic fields play an important role in plasma dynamics, yet it is a quantity difficult to measure accurately with physical probes, whose presence disturbs the very field they measure. The Faraday rotation of a polarized beam of light provides a mechanism to measure the magnetic field without disturbing the dynamics, and has been used with great success in astrophysics and high energy density plasma science, where physical probes cannot be used. However, the rotation is typically small, which degrades the accuracy of the measurement. Paradoxically, the main source of error is the probe beam itself. Since polarization cannot be measured directly, detectors rely on a polarizer to measure a small change in beam intensity instead. In this work, we show how suppress the beam intensity that is not part of the Faraday rotation signal by taking forming an optical derivative. Since the rotation measurement is now strictly proportional to the beam intensity, the system allows to amplify the rotation measurement simply by increasing the laser power.

Optics,Plasma Physics
Fiber self-mixing interferometer with orthogonally polarized light compensation.

Shaohui Zhang,Shulian Zhang,Liqun Sun,Yidong Tan

DOI: https://doi.org/10.1364/OE.24.026558

IF: 3.8

2016-01-01

Optics Express

Abstract:A fiber heterodyne self-mixing interferometer with orthogonally polarized light compensation is achieved. This system can adapt to various complex scenes while still keeping ultra-high sensitivity and anti-disturbance capability. Ultra-high sensitivity microchip laser is used as the laser source and polarization maintaining(PM) fiber makes the light path easy to accommodate to complex spaces, such as remote or narrow and small space. Besides, orthogonally polarized light inside PM fiber can eliminate the measurement error on account of environment disturbance. At present, the displacement resolution could be less than 10nm, which shows a great potential in nano-metrology. (C) 2016 Optical Society of America
Interferometric polarization compensation based on one single polarization-maintaining fiber

Yibin Qian,jiakun Li,Peizhi Jia,Qibo Feng,Jing Zhao,Jiakun Li

DOI: https://doi.org/10.1364/oe.513867

IF: 3.8

2024-03-02

Optics Express

Abstract:Yibin Qian, Jiakun Li, Peizhi Jia, Qibo Feng, Jing Zhao In an interferometry system based on one single polarization-maintaining fiber (PMF), defects like the laser's ellipticity, the ... [Opt. Express 32, 9420-9432 (2024)]

optics
High-Spatial-Resolution and High-Speed Distributed Vibration Sensing Based on $\Varphi-\Text{ofdr}$

Zhang Xiong,Hongwei Li,Yanyang Lei,Tianfu Li,Yanda Qu,Yongkang Dong

DOI: https://doi.org/10.1109/icocn63276.2024.10648486

2024-01-01

Abstract:We report on a high-spatial-resolution and high-speed phase sensitive optical frequency domain reflectometry system for dynamic measurement based on a distributed feedback laser utilizing the feedback iteration algorithm for linear frequency modulation, which greatly simplifies the experimental equipment and reduces the cost. Fiber with embedded weak reflector array spaced at 4cm intervals has been adopted as the sensing fiber, and a single-branch experimental structure is employed. Demonstration in terms of distributed vibration sensing with a 4cm spatial resolution and 4kHz repetition frequency has been verified, showing excellent crosstalk suppression capability and a high SNR of 50dB.
Polarization self-compensation in a laser-driven interferometric fiber optic gyroscope with high long-term stability

Jie Zhao,Xinyun Liang,Wenfeng Huang,Yuan Wu,Huadong Cheng,L. Q. Chen

DOI: https://doi.org/10.1364/oe.519033

IF: 3.8

2024-04-04

Optics Express

Abstract:Jie Zhao, Xinyun Liang, Wenfeng Huang, Yuan Wu, Huadong Cheng, L. Q. Chen We present a laser-driven interferometric fiber optic gyroscope (IFOG) with polarization self-compensation to achieve high scale-factor ... [Opt. Express 32, 14054-14066 (2024)]

optics
Dynamic Frequency-Modulated Continuous-Wave LiDAR Coupled Through a Rotary Interface

Caiming Sun,Zhen Chen,Fei Teng,Qi Wang,Jing Lin,Binghui Li,Wu Shi,Dagong Jia,Xuejin Li,Aidong Zhang

DOI: https://doi.org/10.1109/jlt.2023.3289161

IF: 4.7

2023-01-01

Journal of Lightwave Technology

Abstract:In order to acquire the tracking information across a rotary joint, a dynamic frequency-modulated continuous-wave (FMCW) laser ranging system is designed to couple through a rotary interface. A setup for FMCW light detection and ranging (LiDAR) is proposed to couple through a fiber optic rotary joint (FORJ), whose optical path is able to eliminate the influence of rotary coupling on the generation of beat frequency. This FMCW LiDAR uses real-time correction for nonlinear laser chirps by synchronizing the FMCW measurement signals with laser injection current at data acquisition (DAQ). Then, phase variations induced by rotary coupling are excluded from the FMCW measurements. The acquisition rate is kept much higher than the rotation speed of FORJ, in order to reduce the influence of rotary coupling on the real-time nonlinearity correction. The linearization of laser frequency modulation through a FORJ is conducted by resampling of over 3000 intervals interpolated in every up-sweep or down-sweep of 25 μs, with measurement signals stretched or compressed in time domain. With the FORJ rotating at the speed of 10°/s in both clockwise and anticlockwise directions, the clear and robust beat signals are achieved. The statistical distributions of measured 50-cm distance under rotary conditions are found out to be similar to that under stationary condition.

engineering, electrical & electronic,optics,telecommunications
Waveform Distortion and Doppler Frequency Broadening of Self-Mixing Signal in Polymer Fiber Optic VCSEL System

Huaqiao Gui,Wei Huang,Jing Xu,Liang Lv,Jianping Xie,Hai Ming

DOI: https://doi.org/10.1117/12.760180

2007-01-01

Abstract:The influences of polymer optical fiber (POF) on self-mixing signals in laser Doppler velocimetry are investigated in detail. The waveform distortion and Doppler frequency broadening of self-mixing signal have been observed for the first time. It indicates theoretically and experimentally that the large acceptance angle of POF facet is the major reason for this phenomenon. The other characteristics of POF, such as bend radius over 7.5mm and thermal effect at room temperature, don't cause significant signal distortion. Lastly, we demonstrated a compact fiber-optic self-mixing laser Doppler vibrometer with high accuracy of half optical wavelength and long working distance between fiber facet and diffusing target adopting a single-longitudinal mode vertical-cavity surface-emitting laser (VCSEL).
All-fiber laser feedback interferometry with 300 m transmission distance

Yifan Wang,Yuhang Li,Xin Xu,Mingwang Tian,Kaiyi Zhu,Yidong Tan

DOI: https://doi.org/10.1364/OL.414140

IF: 3.6

2021-01-01

Optics Letters

Abstract:A novel, to the best of our knowledge, interferometry based on the laser feedback technique with long transmission distance is proposed. The system has the advantages of high sensitivity for uncooperative targets and a simple structure. Also, the quasi-common path orthogonally polarized light compensation method is designed to compensate for the drift in long-distance transmission and achieves more than 200 times reduction experimentally. Using a copper block as a target, the displacement resolution of 20 nm is demonstrated experimentally with 300 m transmission distance. The sub-microwatt power consumption of the measurement beam indicates the high sensitivity of the interferometry. The performance, in terms of linearity, is also evaluated. Although a lot needs to be improved, the proposed method is promising for further development toward practical applications, like sensors in remote, nuclear radiative, or other harsh conditions. (C) 2021 Optical Society of America
All-Fiber Configuration Laser Self-Mixing Doppler Velocimeter Based on Distributed Feedback Fiber Laser

Shuang Wu,Dehui Wang,Rong Xiang,Junfeng Zhou,Yangcheng Ma,Huaqiao Gui,Jianguo Liu,Huanqin Wang,Liang Lu,Benli Yu

DOI: https://doi.org/10.3390/s16081179

2016-07-27

Abstract:In this paper, a novel velocimeter based on laser self-mixing Doppler technology has been developed for speed measurement. The laser employed in our experiment is a distributed feedback (DFB) fiber laser, which is an all-fiber structure using only one Fiber Bragg Grating to realize optical feedback and wavelength selection. Self-mixing interference for optical velocity sensing is experimentally investigated in this novel system, and the experimental results show that the Doppler frequency is linearly proportional to the velocity of a moving target, which agrees with the theoretical analysis commendably. In our experimental system, the velocity measurement can be achieved in the range of 3.58 mm/s-2216 mm/s with a relative error under one percent, demonstrating that our novel all-fiber configuration velocimeter can implement wide-range velocity measurements with high accuracy.
Upgrade of far-infrared laser-based Faraday rotation measurement on MST.

W X Ding,D L Brower,W F Bergerson,L Lin

DOI: https://doi.org/10.1063/1.3466898

IF: 1.6

2010-01-01

Review of Scientific Instruments

Abstract:Recently, the far-infrared (FIR) laser (lambda(0) 0 = 432 mu m) Faraday rotation measurement system on MST has been upgraded. The dc flowing-gas discharge CO2 pump laser is replaced by a rf-excited, sealed CO2 laser at 9.27 mu m (GEM select 100, Coherent Inc., Santa Clara, CA), which is subdivided equally into three parts to simultaneously pump three FIR cavities. The total infrared pump power is approximately 80 W on the 9R (20) line required to pump the formic acid molecule. Each FIR cavity produces similar to 12 mW, sufficient for 11 simultaneous chord interferometry-polarimetry operations. Three key issues [(1) conservation of circularly polarized wave, (2) colinearity of two probe waves, and (3) stability of intermediate frequencies between lasers] affecting the Faraday rotation measurement have been resolved experimentally. (C) 2010 American Institute of Physics. [doi:10.1063/1.3466898]
Broadband High-Precision Faraday Rotation Spectroscopy with Uniaxial Single Crystal CeF3 Modulator

John H. Lacy,Gabriel E. Patenotte,Abby C. Kinney,Protik K. Majumder

DOI: https://doi.org/10.3390/photonics11040304

IF: 2.536

2024-03-27

Photonics

Abstract:We present a low-noise (<10 μrad/Hz) broadband Faraday Rotation Spectroscopy method which is feasible for near-ultraviolet through near-infrared wavelengths. We demonstrate this in the context of a high-precision spectroscopy experiment using a heated Pb vapor cell and two different lasers, one in the UV (368 nm) and a second in the IR (1279 nm). A key element of the experimental technique is the use of a uniaxial single crystal CeF3 Faraday modulator with excellent transmission and optical rotation properties across the aforementioned wavelength range. Polarimeter performance is assessed as a function of crystal orientation and alignment, AC modulation amplitude, laser power, and laser wavelength. Crystal-induced distortion of the (6p2)3P0→(6p2)3P1 (1279 nm) and (6p2)3P1→(6p7s)3P0 (368 nm) spectral lines due to misalignment-induced birefringence is discussed and modeled using the Jones calculus.

optics
Long-distance random fiber laser sensing system with ultra-fast signal demodulation

Shengtao Lin,Zinan Wang,Yifei Qi,Yunjiang Rao

DOI: https://doi.org/10.1364/ofc.2022.th2a.13

2022-01-01

Abstract:Based on shape characteristics of the Raman gain spectrum, we extend the Random fiber laser remote sensing scenarios from quasi-static to dynamic, achieving 10 kHz signal demodulation over 100 km fiber. (C) 2022 The Author(s)
Fiber-Based Laser Doppler Vibrometer for Middle Ear Diagnostics

Adam T. Waz,Marcin Masalski,Krzysztof Morawski

DOI: https://doi.org/10.3390/photonics11121152

IF: 2.536

2024-12-07

Photonics

Abstract:Laser Doppler vibrometry (LDV) is an essential tool in assessing by evaluating ossicle vibrations. It is used in fundamental research to understand hearing physiology better and develop new surgical techniques and implants. It is also helpful for the intraoperative hearing assessment and evaluation of postoperative treatment results. Traditional volumetric LDVs require access in a straight line to the test object, which is challenging due to the structure of the middle ear and the way the auditory ossicles are accessible. Here, we demonstrate the usage of a fiber-based laser Doppler vibrometer (FLDV) for middle ear diagnostics. Compared to classical vibrometers, the main advantages of this device are the ability to analyze several arbitrarily selected points simultaneously and the flexibility achieved by employing fiber optics to perform analysis in hard-to-reach locations, which are particularly important during endoscopic ear surgery. The device also allows for a simple change in measuring probes depending on the application. In this work, we demonstrate the properties of the designed probe and show that using it together with the FLDV enables recording vibrations of the auditory ossicles of the human ear. The obtained signals enable hearing analysis.

optics
Eliminating polarization-induced fading in interferometric fiber-optic arrays by modulation

XiaoDong Zhou,Wen Zhou,Weizhong Tang,Xianfeng Ye

DOI: https://doi.org/10.1117/12.318155

1998-01-01

Abstract:This paper puts forward a new method to overcome the polarization-induced fading (PIF) in conventional low-birefringence optical fiber constructed interferometric sensor arrays. By inducing high frequency modulation to the state of polarization at the output end of the array, the maximum PIF variation of each sensor's signal is 4.7dB or 6.3dB according to the selection of modulation signal. Combined with an electronic automatic gain control circuit or dividing the each sensor's signal by its visibility, each sensor's signal fading is recovered at the expense of a relevant signal/noise ratio degradation of 4.7dB or 6.3dB.
Coriolis Force Compensation and Laser Beam Delivery for 100-Meter Baseline Atom Interferometry

Jonah Glick,Zilin Chen,Tejas Deshpande,Yiping Wang,Tim Kovachy

2023-11-10

Abstract:The Coriolis force is a significant source of systematic phase errors and dephasing in atom interferometry and is often compensated by counter-rotating the interferometry laser beam against Earth's rotation. We present a novel method for performing Coriolis force compensation for long-baseline atom interferometry which mitigates atom-beam misalignment due to beam rotation, an effect which is magnified by the long lever arm of the baseline length. The method involves adjustment of the angle of the interferometer beam prior to a magnifying telescope, enabling the beam to pivot around a tunable position along the interferometer baseline. By tuning the initial atom kinematics, and adjusting the angle with which the interferometer beam pivots about this point, we can ensure that the atoms align with the center of the beam during the atom optics laser pulses. This approach will be used in the MAGIS-100 atom interferometer and could also be applied to other long-baseline atom interferometers. An additional challenge associated with long baseline interferometry is that since long-baseline atom interferometers are often located outside of typical laboratory environments, facilities constraints may require lasers to be housed in a climate-controlled room a significant distance away from the main experiment. Nonlinear effects in optical fibers restrict the use of fiber-based transport of the high-power interferometry beam from the laser room to the experiment. We present the design of and prototype data from a laser transport system for MAGIS-100 that maintains robustness against alignment drifts despite the absence of a long fiber.

Atomic Physics
A Dispersion Compensation Method Based on Resampling of Modulated Signal for FMCW Lidar

Shuo Jiang,Bo Liu,Shengjie Wang

DOI: https://doi.org/10.3390/s21010249

IF: 3.9

2021-01-02

Sensors

Abstract:In order to eliminate the nonlinearity in the laser modulation process, the dual-interferometers system is often adopted in the frequency modulation continuous wave (FMCW) laser ranging. However, the dispersion mismatch between the fiber reference interferometer and the measurement interferometer will lead to the decrease in ranging accuracy and resolution. In this paper, a dispersion compensation method based on resampling with a modulated signal is proposed. Since the beat signal of the end face of the delay fiber is not affected by dispersion mismatch, it can be modulated to generate a signal whose phase is proportional to that of the target spatial signal. Then, the modulated signal is regarded as the reference clock to sample the target spatial signal. Thereby, the influence of the dispersion mismatch between the two optical interferometers can be eliminated. In this article, simulation is performed to verify the effect of this method, and an experiment is carried out on the target at the distance of 2.4 m. Experiments show that the full width at half maximum (FWHM) of the distance spectrum after dispersion compensation is consistent with the reflected signal from the end face of the delay fiber, and the standard deviation of multiple measurements reached 10.12 μm.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

Long-range fiber-based laser Doppler vibrometer using Faraday rotator for polarization-rotation compensation

Research on Dynamic Performance Evaluation of Fiber Optic Gyroscope Based on Laser Doppler Measurement Technology

All Fiber Real-Time Laser Wavelength Measurement Method Based on Faraday Rotation Effect

All-fiber Laser Wavelength Measurement System Based on Two Quadrature Faraday Rotation Devices

A Low-Cost and Fast Wavelength Measurement Method Based on Faraday Rotation Effect

Faraday rotation signal amplification using high-power lasers

Fiber self-mixing interferometer with orthogonally polarized light compensation.

Interferometric polarization compensation based on one single polarization-maintaining fiber

High-Spatial-Resolution and High-Speed Distributed Vibration Sensing Based on $\Varphi-\Text{ofdr}$

Polarization self-compensation in a laser-driven interferometric fiber optic gyroscope with high long-term stability

Dynamic Frequency-Modulated Continuous-Wave LiDAR Coupled Through a Rotary Interface

Waveform Distortion and Doppler Frequency Broadening of Self-Mixing Signal in Polymer Fiber Optic VCSEL System

All-fiber laser feedback interferometry with 300 m transmission distance

All-Fiber Configuration Laser Self-Mixing Doppler Velocimeter Based on Distributed Feedback Fiber Laser

Upgrade of far-infrared laser-based Faraday rotation measurement on MST.

Broadband High-Precision Faraday Rotation Spectroscopy with Uniaxial Single Crystal CeF3 Modulator

Long-distance random fiber laser sensing system with ultra-fast signal demodulation

Fiber-Based Laser Doppler Vibrometer for Middle Ear Diagnostics

Eliminating polarization-induced fading in interferometric fiber-optic arrays by modulation

Coriolis Force Compensation and Laser Beam Delivery for 100-Meter Baseline Atom Interferometry

A Dispersion Compensation Method Based on Resampling of Modulated Signal for FMCW Lidar