Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Systems engineering approach for the iterative concept design and virtual simulation of the DTT hyper redundant manipulator

Multitarget Adaptive Virtual Fixture Based on Task Learning for Hydraulic Manipulator

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

An obstacle avoidance path planning algorithm to simulate hyper redundant manipulators for tokamaks maintenance

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Screw-based dynamics of a serial/parallel flexible manipulator for DEMO blanket remote handling

Vrm: A Unified Framework For Closed-Form Solutions Of A Special Class Of Serial Manipulators

Design and Validation of a Multi-Arm Relocatable Manipulator for Space Applications

Dynamic Simulation of a Mobile Manipulator with Joint Friction

Mathematical modelling and virtual decomposition control of heavy-duty parallel$-$serial hydraulic manipulators

Development of a novel hybrid haptic (nHH) device with a remote center of rotation dedicated to laparoscopic surgery

A nine-degree-of-freedom modular redundant robotic manipulator: Development and experimentation

Application Of Haptic Virtual Fixtures On Hot-Line Work Robot-Assisted Manipulation

Development of a Remote Handling Robot for the Maintenance of an ITER-Like D-Shaped Vessel

Design and validation of a spatial two-limb 3R1T parallel manipulator with remote center-of-motion

The structure design and kinematics analysis of the manipulator for the upper port remote maintenance in DEMO

Teleoperation Control Design with Virtual Force Feedback for the Cable-Driven Hyper-Redundant Continuum Manipulator

Virtual Decomposition Based Modeling for Multi-DOF Manipulator with Flexible Joint

Design and analysis of the Agile Robot Transporter for ITER in-vessel maintenance

Development of 6-DOF manipulator driven by ceramics reinforced hydrostatic actuators and its experimental evaluations on force control and payload abilities

Experimental Use Validation of the Master Hybrid Haptic Device Dedicated to Remote Center-of-Motion Tasks