Abstract:Given the limited operating ability of a single robotic arm, dual-arm collaborative operations have become increasingly prominent. Compared with the electrically driven dual-arm manipulator, due to the unknown heavy load, difficulty in measuring contact forces, and control complexity during the closed-chain object transportation task, the hydraulic dual-arm manipulator (HDM) faces more difficulty in accurately tracking the desired motion trajectory, which may cause object deformation or even breakage. To overcome this problem, a compliance motion control method is proposed in this paper for the HDM. The mass parameter of the unknown object is obtained by using an adaptive method based on velocity error. Due to the difficulty in obtaining the actual internal force of the object, the pressure signal from the pressure sensor of the hydraulic system is used to estimate the contact force at the end-effector (EE) of two hydraulic manipulators (HMs). Further, the estimated contact force is used to calculate the actual internal force on the object. Then, a compliance motion controller is designed for HDM closed-chain collaboration. The position and internal force errors of the object are reduced by the feedback of the position, velocity, and internal force errors of the object to achieve the effect of the compliance motion of the HDM, i.e., to reduce the motion error and internal force of the object. The required velocity and force at the EE of the two HMs, including the position and internal force errors of the object, are inputted into separate position controllers. In addition, the position controllers of the two individual HMs are designed to enable precise motion control by using the virtual decomposition control method. Finally, comparative experiments are carried out on a hydraulic dual-arm test bench. The proposed method is validated by the experimental results, which demonstrate improved object position accuracy and reduced internal force.

Multitarget Adaptive Virtual Fixture Based on Task Learning for Hydraulic Manipulator

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Human Demonstration Trajectory Refinement for Redundant Manipulators.

Modeling and Control of General Hydraulic Excavator for Human-in-the-loop Automation

Variable Force Tracking Control Via Online Learning

Human-machine Interface for a Master-Slave Hydraulic Manipulator with Vision Enhancement and Auditory Feedback

Position-Based Visual Servoing Control for Multi-Joint Hydraulic Manipulator

A Teleoperation Framework Based on Heterogeneous Matching for Hydraulic Manipulator

Human–Robot Shared Control Based on Locally Weighted Intent Prediction for a Teleoperated Hydraulic Manipulator System

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Online Dynamic Model Correction for Hydraulic Manipulator Grasped Unknown Payload

Static Deformation-Compensation Method Based On Inclination-Sensor Feedback For Large-Scale Manipulators With Hydraulic Actuation

Adaptive Virtual Guides for Compliance Control Skill Teaching in Partially Known Tasks

Compliance motion control of the hydraulic dual-arm manipulator with adaptive mass estimation of unknown object

Adaptive Biological Neural Network Control and Virtual Realization for Engineering Manipulator

Reinforcement Learning-based Virtual Fixtures for Teleoperation of Hydraulic Construction Machine

A General Mobile Manipulator Automation Framework for Flexible Manufacturing in Hostile Industrial Environments

A Bilateral Teleoperation Strategy Augmented by EMGP-VH for Live-Line Maintenance Robot