Abstract:Declining freshwater resources along with their pollution are threatening the life existence on earth. To meet the freshwater demand, one of the most appropriate and possible ways which has been adopted all over the world is to reuse wastewater by removing its impurities. Among many water pollutants, natural organic matter (NOM) is found to be responsible as major precursor for the formation of other pollutants. Removal of NOM from wastewater is being done by using membrane filtration systems incorporated with certain nanofillers to increase membranes efficiency and permeability. In this study, novel nanocomposite reverse osmosis (RO) membranes were prepared using cellulose acetate and chitosan in N,N-Dimethyl formamide. Graphene oxide (GO) nanosheets and zinc oxide (ZnO) in different concentration were loaded to modify the membranes for tuning their RO performance. The confirmation of the functional groups is demonstrated by Fourier transform infrared spectroscopy which revealed the specific peaks indicating the formation of the nano-composite membranes. The surface morphology was studied by scanning electronic microscopy which shows a gradual transformation of the membrane surface from voids-free to macro-voids filled surface up to threshold concentration of GO and ZnO. The thermal properties of GO based membranes were analyzed using thermogravimetric analysis and differential scanning calorimetry. The uniform interaction of the GO and ZnO with polymers induced the remarkable thermal properties of the synthesized membranes. Permeate flux and contact angle measurements were considered to estimate their water content (96%) capacity and NOM rejection (96%) using 0.1 ppm humic acid solution. The permeate flux, NOM rejection and the water content changed directly with GO and inversely with ZnO wt% in the membranes up to GO5 (GO:0.14: ZnO:0.03) whereas the contact angle exhibited the inverse relationship with GO and ZnO concentration in casting solution of the synthesized membranes. Hence it can be concluded that prepared RO membranes are suitable for NOM rejection and recommended for water treatment.

Mechanical Characterization of Graphene Oxide/Zinc Molybdate Nanocomposite Incorporated Cellulose Acetate Ultrafiltration Membranes

Azido-group Functionalized Graphene Oxide/polysulfone Mixed Matrix Ultrafiltration Membrane with Enhanced Interfacial Compatibility for Efficient Water and Wastewater Treatment

Synthesis and Characterization of Blended Cellulose Acetate Membranes

Nanostructured Graphene Oxide Composite Membranes with Ultrapermeability and Mechanical Robustness.

Effects of GO and MOF@GO on the permeation and antifouling properties of cellulose acetate ultrafiltration membrane

Enhancing the Dye-Rejection Efficiencies and Stability of Graphene Oxide-Based Nanofiltration Membranes via Divalent Cation Intercalation and Mild Reduction

“Mix-Then-On-Demand-Complex”: In Situ Cascade Anionization and Complexation of Graphene Oxide for High-Performance Nanofiltration Membranes

Synergistic Effects of Cnt and Go on Enhancing Mechanical Properties and Separation Performance of Polyelectrolyte Complex Membranes

Graphene Oxide-Based Membranes Intercalated with an Aromatic Crosslinker for Low-Pressure Nanofiltration

Functionalised graphene oxide-based nanofiltration membranes with enhanced molecular separation performance

Impact of graphene/graphene oxide on the mechanical properties of cellulose acetate membrane and promising natural seawater desalination

Metal-organic framework-intercalated graphene oxide nanofiltration membranes for enhanced treatment of wastewater effluents

One-step synthesis of zwitterionic graphene oxide nanohybrid: Application to polysulfone tight ultrafiltration hollow fiber membrane

Novel Application of Graphene Oxide to Improve Hydrophilicity and Mechanical Strength of Aramid Nanofiber Hybrid Membrane

Graphene Oxide-in-polymer Nanofiltration Membranes with Enhanced Permeability by Interfacial Polymerization

Regulating the surface properties and interlamellar spacing of GO-based nanofiltration membrane for efficient water treatment

Synergistic effect of GO/ZnO loading on the performance of cellulose acetate/chitosan blended reverse osmosis membranes for NOM rejection

Graphene Oxide Modified Polyamide 66 Ultrafiltration Membranes with Enhanced Anti-Fouling Performance

Development and Study of Novel Ultrafiltration Membranes Based on Cellulose Acetate

Polyacrylonitrile ultrafiltration membranes incorporating graphene oxide fillers modified with Zeolitic Imidazolate Framework-8 and 3-aminopropyltriethoxysilane for dye and salt removal in real textile wastewater

High Methylene Blue Adsorption Efficiency of Cellulose Acetate-Based Electrospun Nanofiber Membranes Modified with Graphene Oxide and Zeolite