Abstract:The tunneling magnetoresistance (TMR) angle sensors are employed in various applications as they offer noncontact measurement for full-circle range, consume low power, and have high sensitivity. These sensors provide sine- and cosine-natured nonlinear outputs with respect to the shaft angle. Therefore, a suitable electronic interface is required to estimate and obtain a linear indication of the shaft angle. In this article, one such interface, named, a faster digitizer for half-bridge-based TMR angle sensor (FDHTA), is discussed. The FDHTA utilizes a modified dual-slope-based technique which ensures a smaller conversion time while preserving measurement accuracy. This feature enables accurate measurement even for dynamic inputs. The FDHTA processes sine-cosine outputs from the sensor and renders a linear digital output, without using any explicit analog-to-digital converter (ADC). The measurement accuracy is least affected by a few sensor and circuit parameters. Apart from these features, a compensation technique is proposed to improve accuracy for one important sensor nonideality. The FDHTA is built on a PCB and tested extensively. The worst case nonlinearity, obtained for an ideal sensor, is 0.078%. Further, the FDHTA is found suitable for tracking dynamic inputs for shaft speeds up to 240 r/min with acceptable error. In experimentation, the output nonlinearity is observed to follow the inherent nonlinearity of the TMR angle sensing unit (SU). The FDHTA parameters such as standard deviation (SD), signal-to-noise ratio (SNR), etc., are observed to be at par or better when compared with the existing digitizers. The FDHTA can be employed for position estimation of the steering wheel, rotary valves, antenna, camera, surveillance equipment, etc.

POF sensor for measurement of the clock and anti-clockwise rotation based on cascading of TMBC

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

1506 Determination of the origin position for an angle sensor with a femtosecond laser

An optical torsion fiber sensor with simultaneous direction and angle measurement

FFT Algorithm-Assisted Polarimetric Twist Sensor

Compact Torsion Sensor with High Sensitivity Using Angle-offset Long Period Grating Inscribed in Multicore Fiber

Oscillator-Less Direct-Digital Front-End Realizing Ratiometric Linearization Schemes for TMR-Based Angle Sensor

Fiber Bending Sensor with Turning Point in a Multimode Fiber Peanut-Like Structure

A Stable and Highly Sensitive Directional Torsion Sensor Based on a Helical Double Cladding Microstructured Multicore Fiber

Two-dimensional displacement optical fiber sensor based on macro-bending effect

High-speed and High-Precision Torsion Sensor Based on Polarization-Induced Microwave Photonic Phase Shift Measurement

Direction-Discriminating torsion sensor based on optical fiber Mach-Zehnder interferometer

In-fiber torsion sensor based on dual polarized Mach-Zehnder interference

Adjustable Optical Fiber Displacement-Curvature Sensor Based on Macro-Bending Losses with A Coding of Optical Signal Intensity

Physiological bending sensor based on tilt angle loss measurement using dual optical fibre

Dynamic Rotational Sensor Using Polymer Optical Fiber for Robot Movement Assessment Based on Intensity Variation

PMF Based Sagnac Interferometric Sensor for Simultaneous Measurement of Strain, Temperature, and Torsion

A Multiplexed Fiber Bragg Grating Angle Sensor for Bolt Loosening Monitoring

Machine-learning-assisted Omnidirectional Bending Sensor Based on a Cascaded Asymmetric Dual-Core PCF Sensor.

3D-Printed Tilt Sensor Based on an Embedded Two-Mode Fiber Interferometer

Analysis of a Faster Digitizer for Tunneling Magneto-Resistance Angle Sensor Configured in Push-Pull Natured Two Half-Bridges