Abstract:The inherent biological hazards associated with ionizing radiation necessitate the implementation of effective shielding measures, particularly in medical applications. Interventional radiology, in particular, poses a unique challenge as it often exposes medical personnel to prolonged periods of high x-ray doses. Historically, lead and lead-based compounds have been the primary materials employed for shielding against photons. However, the drawbacks of lead, including its substantial weight causing personnel's inflexibility and its toxicity, have raised concerns regarding its long-term impact on both human health and the environment. Barium tantalate has emerged as a promising alternative, due to its unique attenuation properties against low-energy x-rays, specifically targeting the weak absorption area of lead. In the present study, we employ the Geant4 Monte Carlo simulation tool to investigate various formulations of barium tantalate doped with rare earth elements. The aim is to identify the optimal composition for shielding x-rays in the context of interventional radiology. To achieve this, we employ a reference x-ray spectrum typical of interventional radiology procedures, with energies extending up to 90 keV, within a carefully designed simulation setup. Our primary performance indicator is the reduction in air kerma transmission. Furthermore, we assess the absorbed doses to critical organs at risk within a standard human body phantom protected by the shield. Our results demonstrate that specific concentrations of the examined rare earth impurities can enhance the shielding performance of barium tantalate. To mitigate x-ray exposure in interventional radiology, our analysis reveals that the most effective shielding performance is achieved when using barium tantalate compositions containing 15% Erbium or 10% Samarium by weight. These findings suggest the possibility of developing lead-free shielding solutions or apron for interventional radiology personnel, offering a remarkable reduction in weight (exceeding 30%) while maintaining shielding performance at levels comparable to traditional lead-based materials.

Performance and feasibility evaluation for radiation shielding of metal oxides: Monte Carlo simulation

Study on the shielding performance of bismuth oxide as a spent fuel dry storage container based on Monte Carlo simulation

Multicomponent X-ray Shielding Using Sulfated Cerium Oxide and Bismuth Halide Composites

Monte Carlo simulation and optimization of neutron ray shielding performance of related materials

Radiation shielding assessment for interventional radiology personnel: Geant4 dosimetry of lead-free compositions

Assessment of the Usability of A Composite Containing Boron Carbide for Shielding the Gamma Rays

Material characterization and Monte Carlo simulation of lead and non-lead X-Ray shielding materials

Detailed Analysis of Gamma-Shielding Characteristics of Ternary Composites Using Experimental, Theoretical and Monte Carlo Simulation Methods

Multilayer radiation shielding system with advanced composites containing heavy metal oxide nanoparticles: a free-lead solution

Fabrication, Characterization and Optimization Design of Flexible Materials for X-ray Shielding with High Efficiency

A closer-look on W and Pb alloys: In-depth evaluation in elastic modulus, gamma-ray, and neutron attenuation for critical applications

Shielding Analysis of Metal Hydride-based Materials for Both Neutron and Gamma Rays Using Monte Carlo Simulation

The Development of a Composite Thin Film Barrier of Tungsten Fe3O4-rGO (FerGO) for the Radiation Shielding of Medical Personnel

Investigating polyurethane foam loaded with high-z nanoparticles for gamma radiation shielding compared to Monte Carlo simulations

Radiation shielding design and development of Bi/Ta/PU lead-free flexible textile composites

Optimization of pure elemental and oxide-based shielding materials for cost

Replacement of Lead by Green Tungsten-Brass Composites as a Radiation Shielding Material

A radiation shielding sensitivity analysis based on metal hydrides multilayers

Nano lead oxide and epdm composite for development of polymer based radiation shielding material: Gamma irradiation and attenuation tests

A comprehensive study of the antibacterial and shielding properties of micro and nano-EPVC lead-free shields

Verification of Optimal X-Ray Shielding Properties Based on Material Composition and Coating Design of Shielding Materials