Solvent extraction with a three-dimensional reticulated hollow-strut SiC foam microchannel reactor

Ye Zhang,Yong Gao,Peng Wang,Duo Na,Zhenming Yang,Jinsong Zhang

DOI: https://doi.org/10.1016/j.cjche.2021.05.018

IF: 3.8

2022-06-01

Chinese Journal of Chemical Engineering

Abstract:Recently, there has been considerable interest in the use of microchannel reactors for hydrometallurgy of rare earths (REs). Here, a novel integrated microchannel reactor based on the hollow-strut SiC foam material is presented and demonstrated to extract Ce3+ and Pr3+ using 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester (P507) as the extractant. The typical three-dimensional reticulated structure of the hollow-strut SiC foam was characterized by scanning electron microscopy and X-ray micro computed tomography. Since the reactor’s structure plays a key role in fluid mixing and mass diffusion during the extraction process, the structure-performance relationship of the foam was studied by extraction experiments combined with numerical simulations. Using the foam with the optimal structure, the influence of the flow rate Q0 of the two liquid phases on the extraction efficiency η and overall volume mass transfer coefficient KLa was discussed. For both RE ions, with increasing Q0, η decreases while KLa increases. For the total flow rate of the two phases of 4 ml⋅min−1, the η values of Pr3+ and Ce3+ reached 98.7% and 97.0%, respectively. For the total flow rate of 36 ml⋅min−1 which was much higher than that of many other microchannel reactors reported in the literatures, the η values of Pr3+ and Ce3+ still reached 92.2% and 86.9%, respectively, and the KLa values of Pr3+ and Ce3+ were 0.198 and 0.161 s−1, respectively, similar to the high values reported for other microchannel reactors studied in previous work. These findings indicate that the hollow-strut SiC foam microchannel reactor is suitable for use in REs extraction.

engineering, chemical