Abstract:The stochastic finite-fault approach was used to model the 2022 Luding earthquake with a magnitude of Mw 6.6 in China at 16 selected near-field stations. To investigate the impact of the site effect on the synthetic results, two models were taken into account: One model was obtained from the generalized inversion technique, and the other model was obtained from the horizontal-to-vertical spectral ratio method. The high-frequency attenuation parameter was estimated to be 0.040 s and the value of 4.0 MPa for the stress parameter was adopted. Comparisons of the recorded and simulated Fourier amplitude spectrum, pseudospectral acceleration, peak ground acceleration, and peak ground velocity were performed to investigate the capability of the selected input parameters. In addition, the model bias, simulated peak ground acceleration and peak ground velocity were calculated by the local site amplification estimated by the two methods. The results show that the site effects estimated by the generalized inversion technique can well simulate the high-frequency response spectra and Fourier amplitude spectrum and can provide peak ground acceleration and peak ground velocity values consistent with the recorded values, while the local site amplification roughly calculated by the horizontal-to-vertical ratio method underestimates the main ground motion characteristics. Furthermore, strong-motion records with the same magnitude but different hypocentral distance ranges in the generalized inversion technique are used to estimate near-surface site effects, which shows that the distance range has a small impact on the estimation of local site amplification. Model parameters that performed well in this study provide confidence in understanding and quantifying seismic hazards in the Luding area from earthquake scenarios with different magnitudes.

A Stochastic Method for Simulating Near‐field Seismograms: Application to the 2016 Tottori Earthquake

Stochastic Finite‐Fault Simulation of the Ms 7.0 Lushan Earthquake Based on Frequency‐ and Distance‐Dependent Radiation Patterns

Improvement of Source Spectrum Fall‐Off for Simulating Ground Motion Using Stochastic Green’s Function Method

Ground motion simulation for the 21 May 2021 Ms 6.4 Yangbi, China, earthquake using stochastic finite-fault method

Ground-motion Simulation Using Stochastic Finite-Fault Method Combined with a Parameter Calibration Process Based on Historical Seismic Data

Improvement of Stochastic Green's Function Method for 3D Broadband Ground-Motion Simulation

Stochastic Finite-Fault Modelling of Ms 6.8 Luding Earthquake in 2022 and Seismic Hazard Scenario of Moxi Fault, Southwest China

Stochastic finite-fault modeling of Ms 6.8 Luding earthquake in 2022 and seismic hazard scenario of Moxi fault, southwestern China

Stochastic Green’s Function Method Considering Non-Uniform Rise Time Distribution to Simulate 3D Broadband Ground Motion

Simulation of the 2022 Mw 6.6 Luding, China, earthquake by a stochastic finite-fault model with a nonstationary phase

Ground Motion Simulations for the 19 January 2020 Jiashi, China, Earthquake Using Stochastic Finite‐fault Approach

Estimation of model parameters and simulation of earthquake ground motion by stochastic finite-fault modelling based on a modified slip-related corner frequency

Probability Density Evolution Method Based Stochastic Simulation of Near-Fault Pulse-Like Ground Motions

Simulation of Ground Motion From Finite‐Fault Modeling Incorporating the Influence of Duration

An updated stochastic finite fault modeling: Application to the M w 6.0 earthquake in Jiashi, China

Regional spectral characteristics, quality factor and site responses in western-central Sichuan, China (II): Application to stochastic ground motion simulation

Improvement of Source Spectrum Fall‐Off for Simulating Ground Motion Using Stochastic Green's Function Method

Improvements to EXSIM in Ground Motion Simulation for Earthquakes Explained by Double‐Corner‐Frequency Source Model

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Modified stochastic finite-fault modelling based on the rupture process: a case study of the 2013 Mw 6.7 Lushan earthquake in China

Simulation of strong ground motions from 2016 Kumamoto (Mw 7.1), Japan, earthquake using modified hybrid technique