Abstract:The trade-off between the safety and effectiveness of NiTi wire in practical applications has consistently hindered its advancement. This underscores the significance of adjusting its microstructure via appropriate heat-treatment techniques. This study systematically investigates the evolution of the constitution phases of the matrix and the grain size as the aging time increases from three minutes to three hours at 550 °C for Ni50.9Ti49.1 wire, and highlights the significant role of the R phase in static/cyclic tensile failure behavior. When aged for thirty minutes, the matrix consists mainly of the B2 phase, similar to the as-received wire, while it tends to transform into the R phase during loading (intermediate-R phase). In contrast, aging for three hours leads to the formation of the R phase as the matrix phase (matrix-R phase). The two types of R phase are discussed and compared in detail with regard to their contribution to the static/cyclic tensile failure behaviour. The longest fatigue life was obtained in wires with the R phase as the matrix phase, which was due to the combined effect: (i) the rapid attainment of a stable state so as to minimise the extent of phase transformation; (ii) coordination deformation of twin and dislocation to alleviate stress concentration; (iii) and the strong bonding between Ti2Ni and the matrix that reduces the occurrence of the "stretching into the hole-coalescence-microcrack process". The enhanced flexibility observed in the wire with matrix-R phase is due to its reduced elastic modulus and lower transformation plateau. The increase in plasticity is linked to changes in the wire's fracture behavior resulting from grain growth. Such microstructural changes allow the alloy wire to exhibit a more uniform plastic deformation under stress, which in turn postpones the onset of significant fracturing.

NiTi wire as a superelastic damping material in structural engineering

Experimental study on performance of Ti-Ni shape memory alloy composite suspension damping system

Effect of Phase Transformation on Damping Performance of Wire Mesh Damper Made of Ni-Ti Shape Memory Alloy

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

The performance of nonlinear vibration control via NiTiNOL–Steel wire ropes

Effect of Temperature on Damping Performance for Wire Mesh Damper Made of Ni-Ti Shape Memory Alloy

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

Nonlinear vibration control of composite beam under base excitation via NiTiNOL–steel wire ropes: experimental and theoretical investigation

Nonlinear vibration suppression of composite laminated beam embedded with NiTiNOL-steel wire ropes

Experimental and computational study of the NiTi thin wires mechanical behavior

Tensile Deformation of Superelastic NiTi Wires in Wide Temperature and Microstructure Ranges

Experimental Study of Superelasticity of Ni-Ti Shape Memory Alloy Wires

Vibration reduction in a composite laminated cylindrical shell via embedded NiTiNOL-steel wire ropes

R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Vibration control of composite laminate via NiTiNOL-steel wire ropes: Modeling, analysis, and experiment

Cyclic behaviour of a novel torsional steel-tube damper

Investigation of the Ageing-Induced R-phase and Its Impact on Static/cyclic Tensile Failure in Ni50.9Ti49.1 Wire

Experimental investigations of building structure with a superelastic shape memory alloy friction damper subject to seismic loads

Mechanical model and structural control performance of a new rotation-magnified viscoelastic damper

Thermal/vibration characteristics of additional damping structures with entangled metallic wire material under high temperature environment

Performance of wire rope damper in vibration reduction of stay cable