Abstract:Silty soil is commonly utilized in construction or road foundations. One of the main geotechnical concerns associated with silty soil is its insufficient strength and susceptibility to liquefaction, which can lead to soil collapse under external loads or its own weight. In-situ chemical stabilization techniques, such as grouting, are favorable for enhancing the mechanical behavior of the soil. However, their application to silty soil is limited due to their low permeability. This study aims to develop a permeable polyurethane (PP) material for grouting to improve the mechanical properties of low-permeability silty soil. An orthogonal test was conducted to analyze the effects of injection pressure , dry density, water content, and curing time on the mechanical properties of silty soil after grouting (PU-SS). Comprehensive studies were carried out on the internal acoustic characteristics and surface deformation of the consolidated soil under uniaxial compression. Finally, considering the effect of water content on compressive strength,the damage constitutive model of consolidated was established. The results indicate that PP can increase the compressive strength of the silty soil up to 5 MPa. Water content emerges as the primary factor influencing the compressive strength of the consolidated soil, with a decrease in strength as water content increases. The digital surface deformation monitoring technique accurately captured the surface strain characteristics, revealing a relatively uniform surface strain distribution pre-peak stress. Subsequently, a deformation concentration zone formed, evolving into a localized deformation band, inducing shear slip along the fractured surface. The acoustic emission (AE) signal proved significant only during the damage stage. The established statistical damage model effectively characterizes the pre-yield and post-yield stages of consolidated soil, accounting for the influence of water content. In conclusion, the findings suggest that permeable polymer (PP) is more effective in improving the mechanical properties of low-permeability silty soil compared to grouting materials like cement, water glass, and silica sol. Expanding on these results, permeable polymers have potential applications in various areas, including preventing seepage and reinforcing soil embankments, strengthening highway subgrades, and fortifying building foundations.

Study on the failure mechanism between polyurethane grouting material and concrete considering the effect of moisture by digital image correlation

Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface

Seepage behavior and mechanical properties of two kinds of polyurethane/water glass in combined grouting experiment

Experimental Study on the Influence of Temperature and Humidity on the Fracture Properties of Polyurethane Grouting Materials

Grouting Mechanism of Polyurethane Composite Materials in Asphalt Pavement Subsidence

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Study on the Water Stability of Polyurethane Concrete from Perspective of Polyurethane-Aggregate Interface

Effect of a Simulated Coal Mine Environment on Polyurethane Grouting Material and a Proposed Polyurethane Strengthening Method

Synthesis and properties of elastomeric polyurethane for grouting

Microstructure and Fatigue Performance of Polyurethane Grout Materials under Compression

Study on the strength influence mechanism and cracking mechanism of stone powder-cement floor grouting materials

Experimental investigation on the failure mechanism of grouted rock mass: Mesostructure and macroscopic mechanical behavior

Static-dynamic damage mechanism and self-heating effect of a clean elastic polyurethane grouting material for trenchless rehabilitation under high stresses

Study on Creep Mechanical Properties of Non-Water Reacting Polyurethane Grouting Material

Compressive fatigue resistance and related microscopic mechanisms in foamed polyurethane grouting materials for roadbed rehabilitation

Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane

Evaluation of Bond Strength of Concrete Repaired Using Polyurethane Grout Material under Static and Impact Loads Coupled with Statistical Analysis

Study of grouting effectiveness based on shear strength evaluation with experimental and numerical approaches

Investigation on basic properties and microscopic mechanisms of polyacrylate latex modified cement grouting material for water blocking and reinforcement

Preparation and Performance Enhancements of Low-Heat-Releasing Polyurethane Grouting Materials with Epoxy Resin and Water Glass

Degradation Behavior and Lifetime Prediction of Polyurea Anti-Seepage Coating for Concrete Lining in Water Conveyance Tunnels