Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Microstructure and Fatigue Performance of Polyurethane Grout Materials under Compression

Fatigue resistant and microstructure evolution of polyurethane grout materials under uniaxial compression

Compressive fatigue resistance and related microscopic mechanisms in foamed polyurethane grouting materials for roadbed rehabilitation

Experiment and Modeling for Compressive Strength of Polyurethane Grout Materials

Sedimentation-affected Engineering Performances and Microstructures of a Hybrid Portland- Sulfate Aluminate Cement Grout Cast in Long Tubes

Study of the mechanical properties and constitutive model of the roadbed rehabilitation polyurethane grouting materials under uniaxial compression

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Static-dynamic damage mechanism and self-heating effect of a clean elastic polyurethane grouting material for trenchless rehabilitation under high stresses

Compression fatigue and self-heating effect of foamed polyurethane grouting materials for roadbed trenchless rehabilitation

Study on Creep Mechanical Properties of Non-Water Reacting Polyurethane Grouting Material

Preparation and Mechanical-Fatigue Properties of Elastic Polyurethane Concrete Composites

Grouting Mechanism of Polyurethane Composite Materials in Asphalt Pavement Subsidence

Effect of Strain Rate on the Compressive Behavior of Polyurethane Bonding

A cleaner polyurethane elastomer grouting material with high hardening strain for the fundamental rehabilitation: The comprehensive mechanical properties study

Experimental Study on the Influence of Temperature and Humidity on the Fracture Properties of Polyurethane Grouting Materials

Investigation on Compressive Fatigue Damage Process of Ultra-High Toughness Cementitious Composites

Compression-Softening Bond Model for Non-Water Reactive Foaming Polyurethane Grouting Material

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Research on the Stressed Performance of Polypropylene Fibrous Concrete Ditch

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Mechanical Behavior of Polyurethane Polymer Materials under Triaxial Cyclic Loading: A Particle Flow Code Approach