The Design of Electronic Password Lock Based on MCU

Ruan Zhon

Abstract:This design used the STC89C52 produced by STC Company as control chip,the STC89C52 microcontroller as the hardware core,and applied C language to write the controlling program of master control chip,password entering to control the electric circuits,which realized the unlocking and locking through controlling the open and close of mechanical switch.

Computer Science,Engineering

What problem does this paper attempt to address?

Design of Password Lock Circuit Based on Microcontroller

L. Yue

Abstract:To replace the traditional mechanical cipher lock with electronic password lock can overcome less code of the mechanical lock and poor confidentiality.Therefore,the research and development of high security electronic password lock circuit is the urgent need of the reality.In order to design access control circuit system of password lock.microcontroller STC89C52 and E2PROM AT24C02 are used as the master chip and the data memory unit,combined with the external keyboard input circuit,LCD12864 display module,sound and light alarm circuit as well as unlock circuit,the control program of the master chip is compiled with C language to complete the function of writing password,storing and modifying.The circuit can change the password several times and has an alarm function.The experimental results show that the circuit can satisfy the password lock control requirements with characteristics of practical application and low cost.

Computer Science
Design of an Electronic Code Lock Based on STM32

Guoqin Zhang,Shi-ying Shen

DOI: https://doi.org/10.1109/ITOEC53115.2022.9734690

2022-03-04

Abstract:People's quality of life needs to be improved, and the anti-theft risk needs to be paid more attention. Therefore, a simple electronic lock is becoming more and more important. The system takes STM32f1 series single chip microcomputer as the main control chip, and the matrix keyboard is used to input and modify the password. In the password input function, the input password is compared with the original password in the memory to determine whether the unlocking function should be performed. The hardware is mainly composed of minimum system development board, relay module, matrix keyboard module, buzzer module and display module. Its function and circuit are designed and analyzed in detail. The software design is mainly composed of three parts: key detection part, key event part and OLED state change to complete the four main functions: key password input and unlocking, password modification, wrong password alarm and display screen. According to the previous design, the software simulation and physical installation and debugging are carried out, and the results fully realize the functions and requirements of the design.

Computer Science,Engineering
Design of the Function Units of Electronic Password Lock

Jiu Dong Li,Y. Zhao,Dong Sheng Wang

DOI: https://doi.org/10.4028/www.scientific.net/AMM.220-223.2008

2012-11-01

Abstract:The hardware modules of electronic password lock were designed in the paper. The single chip microcomputer AT89S51 was chose as the main control chip to control the operation of the whole system. The 4×4 matrix keyboard was devised and the unlocking circuit was made up of the driving circuit and unlocking part. The alarm circuit was composed of a piezoelectric buzzer and its peripheral circuit. The serial electrically erasable memory chip AT24C02 of ATMEL firm was chose as the memory cell for losing electricity. The power supply circuit including of the commercial power supply circuit, power failure detecting and electronic switching circuit and the battery charging circuit was designed. The module functions of the whole system were combined and the hardware circuits of the electronic password lock were designed successfully.

Computer Science,Engineering
Secure electronic lock using pic 16f628a microcontroller

Muhanad Hayder Mohammed

DOI: https://doi.org/10.48550/arXiv.1209.5435

2012-09-24

Other Computer Science

Abstract:The proposed system implements the electronic embedded lock, its provides a great benefit over traditional lock, which use the manual key, so if the key lost or theft then anybody could open the lock, while thieving or losing the long and complex password is harder compare to traditional key, furthermore combining both manual key with computerized password make the system more secure. Long password will reduce the possibilities of breaking the code and opening the lock. The system comprised keypad, and HD44780 20x2 LCD Along with PIC16f628a microcontroller. The firmware control these components such that interaction with keypad is very is ver easy and smoothly, the LCD provide user with messages and notification to be informed about what is the system state. User can performing opening and closing the lock, changing the current password in the microcontroller EEPROM and clearing single digit while entering the password when wrong digit entered (back space). The proposed system firmware developed using assembly language with MPLAB development environment. It tested and implemented in real hardware with proper functioning and bug free.
Design and development of a password- based door lock security system

E. Oni,P. Otasowie

DOI: https://doi.org/10.4314/SA.V14I1

Abstract:This work is a design and development of a micro-controller based, password enabled door lock for home security. The work involved building a working model of a security door lock that is password protected with an AT89C52 microcontroller which operates by sending control signals to a H-bridge that controls the opening and closing of a model door connected to a stepper motor. Accessing and changing various information and settings are done via an electronic system that allows the user to enter secret pass codes via a 4 4 keypad and a 16 2 LCD display. The design incorporated a serial EEPROM that can retain the information during power outages and runs on available power from the mains supply. Once the circuit is plugged to the mains supply, the LCD displays the different menu functions and waits for data input from the keypad, the illustrative door slides open and close when a valid pass code is entered. The work was designed, developed, and tested and found to perform according to design objectives. Key words : Security system, Microcontroller (AT89C52), Keypad access, EEPROM

Computer Science
Intelligent Electronic Lock 'Security Guard' Based on STM32 Microcontroller

Yinghao He,Yun Zhang,Yuguo Sui,Jialiang Wen,Sizhu Chen

DOI: https://doi.org/10.1109/ICDSCA59871.2023.10393438

2023-10-27

Abstract:In the context of today's era, private and efficient identity recognition systems are widely applied, and more traditional security systems are moving towards intelligent and informational development. As a result, intelligent electronic locks have gradually entered people's lives, transforming from simple password locks to embody technological advancements, subtly changing people's habits. This design presents an intelligent electronic lock based on the STM32 microcontroller, which implements multiple unlocking methods such as password unlocking, fingerprint unlocking, RFID card unlocking, and Bluetooth unlocking. This intelligent electronic lock, controlled through touch and mobile devices like smartphones, greatly enhances the user experience in terms of control. Compared to traditional locks, it not only ensures the original security but also adds more functions that align with the present era, facilitating and enriching people's lives. It holds practical significance in real-world applications.

Computer Science,Engineering
Study on the temperature control system design based on the MCU

CHEN Jun

DOI: https://doi.org/10.3969/j.issn.1001-9227.2009.04.015

2009-01-01

Abstract:The single chip computer is applied to product temperature control system which is main control unit in the market throuyhing.A temperature control system is designed by using AT90S8535 single chip,which performance is fine and have development potential produced by ATMEL company.The basic component parts and principle are introduced,and the design of hardware circuit and software are also discussed.
The design of infrared remote control electronic password lock based on ATmega16 MCU

Liao Lanchu

Abstract:A control core by AVR microcontroller( ATmega16) was introduced,processing the received IR codes decoding,and then driving the relay control solenoid locks. This article focuses on the design of the ATmega16 microcontroller based infrared remote electronic locks hardware circuit and software design process to achieve the infrared remote password unlock,infrared remote control to change the password,alarm function when entering the wrong password,which have good practical value and application prospects.

Computer Science,Engineering
The Electronic Lock of Fingerprint Identification

Zhiren Zhu

DOI: https://doi.org/10.54097/fcis.v5i3.13857

2023-11-14

Abstract:Biometrics is more and more widely used in the security system, with the current realistic needs as a starting point, a microcontroller-based fingerprint identification electronic lock design method is proposed to realize the transformation from the traditional security system door locks to the new fingerprint identification electronic locks. This design uses the matrix keyboard to enter the password and fingerprint to unlock the door in two ways: Through the fingerprint module to collect fingerprints; stm32 microcontroller as the main control module of the fingerprint identification electronic lock, the fingerprints collected by the AS608 fingerprint module and the fingerprints in the memory of the microcontroller will be compared, and the results will be displayed on the screen, the comparison is successful to open the lock, and vice versa does not open the lock. Through the 4x4 matrix keyboard to realize the password unlocking; stm32 microcontroller as the main control module of the fingerprint identification electronic lock, the password entered on the matrix keyboard and the password in the memory of the microcontroller will be compared, and the unlocking result will be displayed on the screen. This design has the advantages of small size, high cost-effectiveness and reliable safety factor. The overall test results of the system show that the fingerprint identification electronic lock functions normally, and the functional modules work stably, realizing the basic functions that the fingerprint identification electronic lock has, which can be used for door locks and other various devices that need security locks.

Computer Science
Design of a New Electronic and Mechanical Lock

FU Qiang,TANG Lan,ZHANG Xing-gan

DOI: https://doi.org/10.3969/j.issn.1004-373x.2012.08.052

2012-01-01

Abstract:Fingerprint lock is good at security and reliablibility.In this paper,a new electronic and mechanical lock is designed,to which the right key is used to manage the fingerprint and the password.The lock is divided into two parts: the electronic lock with fingerprint identification module based on the ATmega162 and the mechanical lock based on the PIC16F72.The electronic lock and the mechanical lock are relatively independent.The communication between the two parts is implemented by the super heterodyne receiving and transmitting modules.The verefication shows that the whole system is stable,reliable and high security,and has low power consumption.
Intelligent control method of multifunctional infrared remote-control electronic password lock

黄邓雄,钟水财,何海生,罗仁泽,陈奇麟,戈勇华

2009-05-09

Abstract:The invention provides the design of a multifunctional infrared remote-control electronic password lock, and a singlechip is adopted as a core for design. The new type also has convenience, safety and reliability. A remote-control unlocking code has the characteristic of a pseudo-random number rolling code, carries out graded management for password modification authority and can effectively prevent a password from being copied and stolen. A main control circuit comprises a singlechip central control circuit, a power-failure automatic switching standby power supply circuit, an intelligent charging circuit, an infrared receiving circuit, a motor-driven circuit and a password storage circuit. The lock has the functions of intelligent remote control (remote-control password graded management and remote controller sectional management), emergency unlocking and the like, has multiple functions, wide application range, high practical value, small error rate and strong burglarproof function, is adapted to the field of intelligent locksets and is beneficial to the safe theft prevention of families and vehicles.

Engineering,Computer Science
Design of multifunctional electronic coded lock based on AT89S51

Meng Wei

Abstract:For improving security,reducing power consumption and cost,this paper designs a new type electronic coded lock,which has the function of alarm and code can be changed by many times.It also has real-time monitoring and remote management capabilities.The lock uses AT89S51 SCM and E2PROM AT24C02 as main chip and data memory cell,which united with some peripheral equipment such as keyboard input circuit,display circuit,alarm circuit and unlock circuit,whose software is wrote by VB language and assemble language.It can simplify the structure and source code and reduce the space occupied by ROM.Using of bus communication controller,the host PC does PC,and electronic lock does the lower position chip microprocessor,constituting a master-slave serial communication network,which can achieve regional management of the network.

Computer Science,Engineering
Design and Implementation of Face Recognition Electronic Password Lock based on 51 Main Cypher Unit

Zhang Yingguang

2019-07-08

Abstract:With the continuous development of China's national economy, the need for security and confidentiality is increasing. Electronic password lock based on modern computer technology has become an important trend in the development of security lock. In this paper, based on 51 MCU, according to the design of face recognition electronic password lock, the hardware and software design principles of the system were described in detail; in order to ensure the smooth implementation of various functions of the system, various anti-interference measures were proposed. The design of this system is beneficial to the design and application of electronic password lock, and has a certain reference for the design of similar systems.

Computer Science
Intelligent fingerprint lock based on STM32

Bokang Yang,Huiwen Xia,Wangdi Du

DOI: https://doi.org/10.1109/cac51589.2020.9327366

2020-11-06

Abstract:In this paper, an intelligent fingerprint lock system based on STM32 is studied. The fingerprint identification technology and the traditional password input method are combined to realize the identification of the user, with high security. The system is composed of MCU control module, fingerprint identification module, electromagnetic lock module, user interaction module and power supply part. These systems cooperate with each other to realize a series of functions such as accurate fingerprint identification and unlocking. In terms of program, C language is used for modular programming, which is convenient for debugging and maintenance and upgrading. After the actual test, the system has high recognition rate, fast response speed, and can adapt to various use environment, and has a broad market prospect.
Design of Multifunctional Electronic Anti-theft Lock Based on SCM

Zhang Rong-jua

Abstract:There exist some problems in the present design for the mechanical lock,such as,simple form,poly function,and easily-copied and lost key,while the most commonly-used anti-theft lock only has certain passwords,still having some shortcomings like easily being peeped or videotaped,and most often,the old people and the children forgot the passwords. The design for a new electronic anti-theft lock,taking the above shortcomings into consideration,was given in this paper,which adopts the combination of buttons and fingerprints for unlocking,and also realizes its multifunction of variable passwords,error protection,and information cue,possessing a higher safety and usability.

Computer Science,Engineering
Design and application of new kind of electronic and mechanical antitheft lock using digital code

Mo Changfeng,Zhang Xinggan

DOI: https://doi.org/10.19651/j.cnki.emt.2008.01.020

2008-01-01

Abstract:A new kind of electronic and mechanical antitheft lock using digital code based on the technologies of PIC single-chip microcomputer,serial communication and wireless data transmission is introduced.This lock has several function with good security,identification and alarm-giving.It is simple and has wide application and high reliability. Hardware frame and software flowchart of the system are presented as its function,constitution,principle and the development of mechanism have been specified.
Design of intelligent lock control system based on wireless network

Ze Wang,Wei-Xin Zhu,X. Liu

DOI: https://doi.org/10.1117/12.2653084

2022-11-10

Abstract:In order to improve the utilization rate of laboratory, open laboratory management had become an inevitable requirement, which required intelligent and humanized laboratory management in universities. In this paper, a wireless intelligent electronic lock control system was designed by using STC12C5A60S2 single-chip microcomputer, the design of intelligent lock was completed with Bluetooth technology and WIFI technology on the platform of Android, and the electronic gate control of laboratory was realized. The operation results showed that the design provided technical guarantee for laboratory opening management.

Engineering,Computer Science
Design and Implementation of Infrared Remote Control Code Lock

Qu Xia

Abstract:A kind of infrared remote electronic code lock based on single-chip microcomputer is researched and designed,whose theory and method of the software and hardware are introduced.The system contains code modification,button cue,wrong code alarm,local unlock and remote control without expanding any peripheral chips.The system has characteristic of automatic reset when there′s no button pressed after another in three seconds.The system is safe and reliable,easy to use,worthy of widely use,and has low cost.

Engineering,Computer Science
The Control System of Jacquard Loom Based on MCU

XIANG Gong-hong,CHEN Qi

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.12.057

2005-01-01

Abstract:The control system of jacquard loom based on MCU was designed,the software and hardware of the control system was introduced,and some measures of improving reliability of the system were given.The system can send the design of fabric to the loom from the floppy disk,and overcomes the limitation of working with a mass of pasteboard cards.
Password Based Door Lock System Using 8051 Microcontroller

Sapna Gangrade et al.

DOI: https://doi.org/10.52783/cienceng.v11i1.95

2023-02-18

Proceeding International Conference on Science and Engineering

Abstract:This circuit can be used as a warning device which triggers an alarm whenever the temperature exceeds a preset level. The project is built around AT89S52 microcontroller and uses 5 volts power supply. It detects fire and automatically switches on the motor and buzzer. It can be used to detect fire and to control fire. This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.

The Design of Electronic Password Lock Based on MCU

Design of Password Lock Circuit Based on Microcontroller

Design of an Electronic Code Lock Based on STM32

Design of the Function Units of Electronic Password Lock

Secure electronic lock using pic 16f628a microcontroller

Design and development of a password- based door lock security system

Intelligent Electronic Lock 'Security Guard' Based on STM32 Microcontroller

Study on the temperature control system design based on the MCU

The design of infrared remote control electronic password lock based on ATmega16 MCU

The Electronic Lock of Fingerprint Identification

Design of a New Electronic and Mechanical Lock

Intelligent control method of multifunctional infrared remote-control electronic password lock

Design of multifunctional electronic coded lock based on AT89S51

Design and Implementation of Face Recognition Electronic Password Lock based on 51 Main Cypher Unit

Intelligent fingerprint lock based on STM32

Design of Multifunctional Electronic Anti-theft Lock Based on SCM

Design and application of new kind of electronic and mechanical antitheft lock using digital code

Design of intelligent lock control system based on wireless network

Design and Implementation of Infrared Remote Control Code Lock

The Control System of Jacquard Loom Based on MCU

Password Based Door Lock System Using 8051 Microcontroller