Abstract:Heterostructured materials address the inherent trade-off between strength and toughness, allowing alloys to enhance toughness while simultaneously increasing strength. However, the regulation of heterostructures and the preparation of large-volume specimens remain significant challenges. The aim of this study was to prepare gradient-structured 5083 aluminum alloys using the constrained deformation method and to investigate its effects on the comprehensive mechanical properties. Additionally, the strengthening mechanisms of the constrained deformation specimens were elucidated. The microstructure was characterized using scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The mechanical properties were assessed through microhardness and uniaxial tensile tests. The findings indicate that the constrained deformation treated 5083 aluminum alloy exhibits a substantial improvement in comprehensive mechanical performance. In comparison to the as-received specimens, the yield strength of the constrained deformation specimens (CDS) significantly increases with the increases volume fraction of the DL. Nonetheless, these specimens maintain an average elongation at break ranging from 12.3% to 14.3%. The enhanced properties of the gradient-structured 5083 aluminum alloy are primarily attributed to the high density of geometrically necessary dislocations (GNDs) and the elevated proportion of low-angle grain boundaries (LAGBs). Specifically, the increase in dislocation density contributes significantly to the alloy's strength, while additional heterogeneous deformation-induced (HDI) hardening, along with a high proportion of LAGBs, preserves the alloy's excellent toughness. This study provides novel insights and methodologies for the optimal design and large-scale application of heterostructures in aluminum alloys.

Heterostructured bulk aluminum with controllable gradient structure: Fabrication strategy and deformation mechanisms

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

Abnormal Grain Growth: A Potential Way to Construct Gradient Structure

Constitutive modeling of mechanical behaviors in gradient nanostructured alloys with hierarchical dual-phased microstructures

A Novel Method for the Preparation of Heterostructures 5083 Aluminum Alloys to Enhancing Comprehensive Mechanical Properties

Atomic-scale Insights into the Effect of Layer Thickness Ratio on the Tensile Properties of Heterostructured Nano-Aluminum

Strengthening mechanisms of a heterostructured pure aluminum with extraordinary mechanical properties

Enhancing the ductility in the age-hardened aluminum alloy using a gradient nanostructured structure

Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys

Ductility and strain hardening in gradient and lamellar structured materials

Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility

Gradient structure induced simultaneous enhancement of strength and ductility in AZ31 Mg alloy with twin-twin interactions

Mechanical Properties and Deformation Mechanism of Mg-Al-Zn Alloy with Gradient Microstructure in Grain Size and Orientation

Constitutive modeling of the tension-compression behavior of gradient structured materials

Tensile behaviors and hetero-deformation-induced hardening mechanisms in medium entropy alloys with dual gradients of grain size and coherent nanoprecipitate

Achieving Superior Strength-Ductility Balance in Novel Heterogeneous Lamella Structures of Al-Zn-Mg-Cu Alloys

Heterogeneous Microstructure and Deformation Behavior of an Automotive Grade Aluminum Alloy

Tailoring Hierarchical Microstructures and Nanoprecipitates in Additive-Manufactured Al-Zn-Mg-Cu-Nb Alloys for Simultaneously Enhancing Strength and Ductility

Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy

Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification

Heterogeneous lamella structure design to simultaneously strengthen and toughen aluminum alloys