Abstract:The paper aims to simulate the micromechanical behavior of asphalt mixtures during the compaction process using the Discrete Element Method (DEM). The interactions between the components of a Porous Asphalt (PA) mixture were represented using an Elastic Viscoelastic Contact Model (EVCM), which is a user-defined model implemented in EDEM software, developed based on linear elastic and Burger's viscoelastic constitutive equations. The macroscale parameters of asphalt mortar were characterized using the nonlinear regression analysis of master curves obtained from Dynamic Shear Rheometer (DSR) tests. The verification process of EVCM successfully indicated that the computations trends fall within the range of expected values for the typical asphalt mixture material. Further, a Superpave Gyratory Compaction (SGC) test was carried out and the obtained sample was scanned using X-ray Computed Tomography (X-ray CT) to capture the air void distributions. The DEM was utilized where digital samples were established to simulate the overall process of laboratory and field compaction. The simulation results showed that the model provided a comparable prediction of responses and demonstrated the capability of SGC to fabricate a representative sample. The influence of temperature on the asphalt compaction process was explored and the results implied that temperature decreasing adversely affects the compactability and dramatically increases the demanded compaction efforts which are consistent with the law of viscoelasticity. On the contrary, when the temperature is high, the asphalt binder becomes too fluid and roller loads will simply displace, or "shove" the mat rather than compact it. Tracking the change in the air voids proportion indicates that the motion of aggregates is rather compound. The aggregates flowed vertically downwards in line with the compacting orientation while moved horizontally outwards away from the center. The results demonstrated that the model effectively simulated the compaction process, the developed model, and can be considered as a useful tool. All in all, the findings confirm that the concept is technically practicable, affording the model a tremendous potential to help researchers understand the microstructural phases of asphalt mixture during the compaction.

Revolutionising Egyptian pavement design: a comprehensive E* database and advanced modeling approach for contextually informed performance predictions

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Development of an Artificial Neural Network-Based K-Value Prediction Model to Improve the Sensitivity of Base Layer on Rigid Pavement Performance

A Simplified Mechanistic-Empirical Flexible Pavement Design Method for Moderate to Hot Climate Regions

Elasto-viscoplastic FEA of Reinforced Pavements under Traffic Loading

Tree-Based Ensemble Methods: Predicting Asphalt Mixture Dynamic Modulus for Flexible Pavement Design

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Evaluating Dynamic Modulus for Indiana Mechanistic-Empirical Pavement Design Guide Practice

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

Predicting Flexible Pavement Distress and IRI Considering Subgrade Resilient Modulus of Fine-Grained Soils Using MEPDG

Mechanistic-empirical evaluation of specific polymer-modified asphalt binders effect on the rheological performance

Preliminary Study on Multi-Scale Modeling of Asphalt Materials: Evaluation of Material Behavior through an RVE-Based Approach

Numerical Investigation of Design Strategies to Achieve Long-Life Pavements

Comparing Machine Learning Models with Witczak NCHRP 1-40D Model for Hot-Mix Asphalt Dynamic Modulus Prediction

Micromechanical simulation of porous asphalt mixture compaction using discrete element method (DEM)

Enhancement of porous asphalt mixtures modified with various fibers and ethylene-vinyl acetate polymer

Development of Dynamic Viscoelastic Pavement Analysis Program

Prediction Modelling on Dynamic Modulus of Recycled Asphalt Mixtures Based on Meso-Mechanical Analysis