Abstract:Lithium-ion batteries (LIBs) have emerged as an unmatched candidate in the development of electric vehicles (EVs) and hybrid electric vehicles (HEVs). The LIBs produce significant amount of heat during operation and therefore, their thermal management is crucial for safety and reliable operation. Therefore, a unified three-dimensional numerical study from cell level to battery pack level incorporating an effective thermal management system is required. The current study presents an analysis on LIB module coupled with phase change material (PCM)/copper metal foam (MF) composite for thermal management. A three-dimensional (3D) thermal model is developed for a prismatic single cell and a 7S1P battery pack (26 V) subjected to rapid discharging, realistic drive cycles and thermally abusive conditions. The electrochemical behavior of the cell is modeled using a sub-scale equivalent circuit model. Both the thermal equilibrium and thermal non-equilibrium conditions have been compared for the coupled simulations of MF-PCM composite. The effect of composite characteristics such as PCM thickness, foam porosity and pores per inch (PPI) on the temperature distribution is analyzed. The thermal performance of the MF-PCM composite is evaluated for rapid discharging tests (5C and 4C), aggressive duty and realistic driving cycles, and external and internal short circuit tests. For 8 mm thickness of MF-PCM composite with porosity of 0.95, the MF-PCM composite is found to reduce the maximum cell temperature by 3.77 K compared to pure PCM case and maintains a more uniform temperature gradient. The temperature rise in cells can be reduced by 56 % compared to the cells with natural convection cooling. While simulating four continuous loops of aggressive duty cycles, the end temperature of the cells is found to be 310.9 K for MF-PCM composite, in contrast to 341.3 K for natural convection cooling. MF-PCM composite limits the temperature and temperature gradient in the battery pack (7S1P) and eliminates the temperature hotspots. The current configuration of PCM-MF is found to be effective in controlling the battery pack temperature for realistic drive cycles.

Passive thermal management system of lithium-ion batteries employing metal foam/ pcm composite for the development of electric vehicles

An Intelligent Thermal Management System for Optimized Lithium-Ion Battery Pack

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Heating Strategy for Electric Vehicular Battery Pack Based on CFD Analysis

Experimental Study on Thermal Management of Batteries Based on the Coupling of Metal Foam-Paraffin Composite Phase Change Materials and Air Cooling

Experimental study of a passive thermal management system for high-powered lithium ion batteries using porous metal foam saturated with phase change materials

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials

Analysis of Li-ion battery under high discharge rate embedded with metal foam phase change composite: A numerical study

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

Passive and hybrid battery thermal management system by cooling flow control, employing nano-PCM, fins, and metal foam

Numerical evaluation of a thermal management system consisting PCM and porous metal foam for Li-ion batteries

Improving the Cooling Performance of Cylindrical Lithium-Ion Battery Using Three Passive Methods in a Battery Thermal Management System

Thermal control of lithium-ion batteries for electric cars by metal foam partially filled with Phase Change Material

Experimental Investigation on Thermal Management of Electric Vehicle Battery Module with Paraffin/Expanded Graphite Composite Phase Change Material

An optimal design of battery thermal management system with advanced heating and cooling control mechanism for lithium-ion storage packs in electric vehicles

Hybrid cooling-based lithium-ion battery thermal management for electric vehicles

Thermal performance of a hybrid thermal management system that couples PCM/copper foam composite with air-jet and liquid cooling

A Low-Cost and Lightweight Thermal Management System for Lithium-Ion Battery Modules Based on Composite PCM under Normal EV Operating Conditions

Investigation on Cooling Performance of Composite PCM and Graphite Fin for Battery Thermal Management System of Electric Vehicles

Thermal management of a LiFePO4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates