Production of nickel‐rich cathodes for lithium‐ion batteries from lab to pilot scale under investigation of the process atmosphere

Carina A. Heck,Fabienne Huttner,Julian K. Mayer,Olga Fromm,Markus Börner,Thilo Heckmann,Philip Scharfer,Wilhelm Schabel,Martin Winter,Arno Kwade
DOI: https://doi.org/10.1002/ente.202200945
IF: 4.149
2023-02-01
Energy Technology
Abstract:The selection of an appropriate cathode active material is important for operation performance and production of high‐performance lithium‐ion batteries. Promising candidates are nickel‐rich layered oxides like LiNixCoyMnzO2 (NCM) with nickel contents of 'x' ≥ 0.8, characterized by high electrode potential and specific capacity. However, these materials are associated with capacity fading due to their high sensitivity to moisture. In this study, two different polycrystalline NCM materials with nickel contents of 0.81≤ 'x' ≤0.83 and protective surface coatings were processed in dry room atmosphere (dew point of supply air ≈ – 65°C) at lab scale including the slurry preparation and coating procedure. In comparison, cathodes were produced in ambient atmosphere and both variants were tested in coin cells. Moreover, processing at pilot scale in ambient atmosphere was realized successfully by continuous coating and drying of the cathodes. Relevant electrode properties such as adhesion strength, specific electrical resistance and pore size distribution for the individual process steps were determined, as well as the moisture uptake during calendering. Furthermore, rate capability and cycling stability were investigated in pouch cells, wherein initial specific discharge capacities of up to 190 mAh g–1 (with regard to the cathode material mass) were achieved at 0.2 C. This article is protected by copyright. All rights reserved.
energy & fuels
What problem does this paper attempt to address?