Abstract:The bridge deflection data measured in field are greatly affected by temperature. In some situations, temperature can be the dominant factor comparing with loads and other factors. Generally, dynamic deflection contains information related to the health condition of bridge. It is wildly used in dynamic deflection warning system. The temperature-induced deflection might lead to the inaccuracy of such system. Therefore, it is important to separate the temperature-induced deflection when implement bridge health condition assessment using dynamic deflection data. However, the accuracy of existing methods of temperature-induced deflection separation is low. This low accuracy is normally caused by mode aliasing and excessive elimination of feature components, etc. To this end, this study proposed an innovative method of temperature-induced deflection separation based on the time-varying filtered empirical mode decomposition (TVFEMD), permutation entropy (PE) and Kullback–Leibler divergence (KLD). The proposed method is used to extract temperature-induced deflection from bridge deflection data. It overcomes the problems of mode aliasing and end-point effects by reconstructing the signals with the same composition. The separating accuracy is also improved by the non-linear feature extracting ability of the proposed method. First, TVFEMD was introduced to decompose the original bridge deflection data into a number of intrinsic mode functions (IMFs). Then, PE was adopted to measure the complexity of each IMF, by which all IMFs can be reconstructed into several new subseries. Furthermore, KLD was employed to calculate the divergence values between these reconstructed subseries and the measured ambient temperatures. The subseries with the smallest divergence value can be considered to be the temperature-induced deflection. Finally, numerical study and locale measurement were utilized to comprehensively validate the effectiveness of the proposed method. The results show that the identification accuracy of the proposed method exceeds 90%. It outperforms the other involved models in terms of separating daily and annual temperature-induced deflection.

Temperature-induced deflection separation based on bridge deflection data using the TVFEMD-PE-KLD method

Early Warning for Continuous Rigid Frame Bridges Based on Nonlinear Modeling for Temperature-Induced Deflection

An Integrated Machine Learning Algorithm for Separating the Long-Term Deflection Data of Prestressed Concrete Bridges

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Correlation model of deflection, vehicle load, and temperature for in‐service bridge using deep learning and structural health monitoring

Automatic uncoupling of massive dynamic strains induced by vehicle- and temperature-loads for monitoring of operating bridges

Deep learning-based minute-scale digital prediction model for temperature induced deflection of a multi-tower double-layer steel truss bridge

A Morphology Filter-Assisted Extreme-Point Symmetric Mode Decomposition (MF-ESMD) Denoising Method for Bridge Dynamic Deflection Based on Ground-Based Microwave Interferometry

Deflection estimation of beam structures based on the measured strain mode shape

Digital Integration of Temperature Field of Cable-Stayed Bridge Based on Finite Element Model Updating and Health Monitoring

Damage Detection of Bridge Structures Using Modal Flexibility under Temperature Variations

Deflection Estimation of Truss Structures Using Inverse Finite Element Method

Case Study of Deep Learning Model of Temperature-Induced Deflection of a Cable-Stayed Bridge Driven by Data Knowledge

A temperature-driven approach for quantitative assessment of strengthening effect of continuous bridges using structural health monitoring data

Insights into temperature effects on structural deformation of a cable-stayed bridge based on structural health monitoring

Digital Model of Deflection of a Cable-Stayed Bridge Driven by Deep Learning and Big Data Optimized via PCA-LGBM

Experimental and statistical investigation on temperature gradient of CFST truss chords

Time-varying Multivariate Linear Regression Modeling of Temperature-induced Bearing Displacements of A Single Tower Cable-Stayed Bridge

REAL-TIME SEPERATION OF TEMPERATURE EFFECT ON DYNAMIC STRAIN MONITORING AND MOVING LOAD IDENTIFICATION OF BRIDGE STRUCTURE

Deformation monitoring and analysis of a long-span cable-stayed bridge during strong typhoons

Global temperature behavior monitoring and analysis of a three-tower cable-stayed bridge