Abstract:Improving power generation of microbial fuel cells (MFCs) requires better methods to quantify the impact of the solution chemistry on performance. While buffer concentration and conductivity have been indicated to impact performance of flat (carbon cloth) anodes, we were able for the first to time to quantitatively determine the impact of the phosphate buffer solution (PBS) concentration separate from conductivity on electrode resistances of commonly used brush anodes and activated carbon cathodes. Using the electrode potential slope (EPS) method, we showed that the anode resistance decreased by 64% (from 14.6 ± 0.1 mΩ m2 to 5.3 ± 0.1 mΩ m2) by increasing the PBS concentration from 50 to 200 mM. There was no appreciable change in the cathode resistance (17.0 ± 0.1 mΩ m2, 50 mM; 18.9 ± 0.2 mΩ m2, 200 mM) although overall performance increased due to a larger cathode experimental working potential (ECat,e0-50 = 268.9 ± 0.9 mV, ECat,e0-200 = 370 ± 1 mV). Adding phosphate buffer to low conductivity synthetic wastewater containing 0.25 g L−1 sodium acetate decreased the anode resistance by 52% (from 59.1 ± 0.2 mΩ m2 to 28.1 ± 0.1 mΩ m2), but increasing only conductivity by adding NaCl or acetate had little impact on electrode resistances. Using electrochemical impedance spectroscopy (EIS), we determined the reasons for these responses. The cathode was limited by oxygen reduction reaction (ORR) kinetics, while the brush anode was limited by mass transfer (proton diffusion), consistent with the impact of buffer concentration on performance. These results have important implications for operation of MFCs as increasing solution conductivity alone, for example, by adding seawater, will not be sufficient to improve anode performance.

Electrochemical impedance spectroscopy studies of the buffered and non‐buffered microbial fuel cell

Effect of Buffer Charge on Performance of Air-Cathodes Used in Microbial Fuel Cells

Quantifying the factors limiting performance and rates in microbial fuel cells using the electrode potential slope analysis combined with electrical impedance spectroscopy

Effect of Electricity on Microbial Community of Microbial Fuel Cell Simultaneously Treating Sulfide and Nitrate

Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

Study on Electricity Generation from Bio-cathode Microbial Fuel Cell

Equivalent circuits studied by means of electrochemical tests employing different inoculum and simultaneous treatment during bioelectricity production in a single chamber-microbial fuel cell

Effect of anaerobic sludge on the bioelectricity generation enhancement of bufferless single-chamber microbial fuel cells

Flow shear stress applied in self-buffered microbial fuel cells

Improved Performance of Microbial Fuel Cells Enriched with Natural Microbial Inocula and Treated by Electrical Current

Power production using a batch double‐chamber microbial fuel cell from brewery wastewater: Effects of electron acceptors

Investigating the influence of Saccharomyces cerevisiae on microbial fuel cell performance through bioelectrochemical and biochemical approaches under varied operating conditions

Effective factors on the performance of microbial fuel cells in wastewater treatment – a review

Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration.

Modeling and experimental investigation of the effect of carbon source on the performance of tubular microbial fuel cell

Role of electrode and proton exchange membrane configurations on microbial fuel cell performance toward bioelectricity generation integrated wastewater treatment

Exogenous electric field as a biochemical driving factor for extracellular electron transfer: Increasing power output of microbial fuel cell

Set up of a Microbial Fuel Cell for the Treatment of a Garden Compost Leachate: Impact of the External Polarizing Electric Resistance Upon the Chemical Oxygen Demand Removal

Production of electricity from the treatment of continuous brewery wastewater using a microbial fuel cell

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

Optimization of microbial fuel cell process using a novel consortium for aromatic hydrocarbon bioremediation and bioelectricity generation