Abstract:BACKGROUND:This study compared 3 nebulizer technologies for inter- and intradevice reproducibility, humidification, and fill volume sensitivity during mechanical ventilation: a breath-enhanced jet nebulizer, a vibrating mesh nebulizer, and a jet nebulizer. The breath-enhanced jet nebulizer featured a new design located on the wet side of the humidifier to reduce aerosol loss and potential humidifier contamination. The vibrating mesh nebulizer and the jet nebulizer were placed on the dry side.METHODS:Aerosol delivery was measured using multiple ventilator settings (inspiratory time = 0.45–1.01 s). Using radiolabeled saline and a gamma camera, bench studies were performed using a ventilator to test 4 breathing patterns. Four scenarios were assessed during testing: 3 mL and 6 mL fill volumes with and without heated wire humidification. Measurements included inhaled mass (as a percentage of the nebulizer charge), nebulizer residual, mass balance, and aerosol particle size distribution. Statistics were determined using Mann-Whitney and linear regression.RESULTS:The inhaled mass for the breath-enhanced jet nebulizer was 10.5–29.2% and was affected by fill volume (P = .004) but not by humidity. The inhaled mass for the vibrating mesh nebulizer was 0.9–33% and was unaffected by fill volume and humidity. The inhaled mass for the jet nebulizer was 2.5–25.9% and was affected by both fill volume (P = .009) and humidity (3 mL, P = .002). The inhaled mass for the vibrating mesh nebulizer was more variable due to random failures to achieve complete nebulization, and inhaled mass correlated closely with residual mass: IM% = –0.233(Residual%) + 24.3, r2 = 0.67, P < .001. For all devices, large particles were lost in the ventilator tubing; large particles were also lost in the humidifier for the vibrating mesh nebulizer (17% nebulizer charge), resulting in similar particle distributions (mass median aerodynamic diameter 1.33–1.95 μm) for all devices.CONCLUSIONS:Nebulization with the breath-enhanced jet nebulizer was less sensitive to humidification than the jet nebulizer. Delivery via the vibrating mesh nebulizer was not predictable, with random failure to empty (55% experimental runs). All devices delivered similar particle distributions. Wet-side aerosol delivery avoids humidifier contamination, and breath-enhanced technology can ensure better control of drug delivery.

Considerations in humidification by nebulization.

Reassessing the Role of Heated Humidification During Nebulization: Implications for Clinical Practice

Quantifying Aerosol Delivery in Simulated Spontaneously Breathing Patients With Tracheostomy Using Different Humidification Systems With or Without Exhaled Humidity

Consequences of Pausing Heated Humidification During Invasive Ventilation

Effect of Interrupting Heated Humidification on Nebulized Drug Delivery Efficiency, Temperature, and Absolute Humidity During Mechanical Ventilation: A Multi-Lab In Vitro Study

[A rationale basis for airways conditioning: too wet or not too wet? ].

Aerosol Delivery to Simulated Spontaneously Breathing Tracheostomized Adult Model With and Without Humidification

Clinical outcome associated with the use of different inhalation method with and without humidification in asthmatic mechanically ventilated patients

Factors Determining Continuous Infusion Aerosol Delivery During Mechanical Ventilation

An in vitro study of the effects of respiratory circuit setup and parameters on aerosol delivery during mechanical ventilation

Study of humidifying effect of continuous atomization with jet nebulizer on tracheostomy airway

Nebulized Therapies in COPD: Past, Present, and the Future

The effect of decoupling humidity control on aerosol drug delivery during HFNC for infants

Research progress of the artificial airway humidification

Nebuliser therapy in critical care: The past, present and future

The function profile of compressed-air and ultrasonic nebulizers

Fundamentals of aerosol therapy in critical care

The effects of aerosol concentration on the evolution, transport, and deposition of hygroscopic droplets in the highly idealized MT model: A numerical study

Relevant Analysis of Mechanical Ventilation in Humidification of Artificial Airway

Performance of Invasive Mode in Different Heated Humidification Systems With High-Flow Nasal Cannula

Comparison of Vibrating Mesh, Jet, and Breath-Enhanced Nebulizers During Mechanical Ventilation