Abstract:With the rapid pace of socioeconomic progress, there has been a continuous rise in the generation of municipal solid waste incineration (MSWI) fly ash. Enhancing the efficiency of MSWI fly ash utilization, minimizing expenses, and developing more cost-effective and environmentally sustainable cementitious materials represent critical scientific challenges that warrant immediate attention. The research commenced with the preliminary treatment of MSWI fly ash using a blend of chemical activators and a water rinsing method. Following this, quicklime and coal fly ash were incorporated to formulate a geopolymer derived from MSWI, aimed at stabilizing the MSWI fly ash. Throughout this investigation, a selection of five chemical activators—calcium hydroxide, sodium hydroxide, sodium silicate, dilute sulfuric acid, and citric acid—was employed in conjunction with a water-washing procedure to condition the MSWI fly ash. Three single factor experiments denoted A, B, and C, were designed, and the corresponding geopolymer samples were prepared. In this research, the analysis focused on the solidified MSWI fly ash-based geopolymer samples, examining their physical and chemical characteristics, compressive strength, levels of heavy metal release, and the structure at a microscopic level. The findings revealed that the B3 series exhibited the most substantial 28-day compressive strength, reaching 1.692 MPa. Concurrently, the concentrations of leached heavy metals, including zinc (Zn), copper (Cu), chromium (Cr), lead (Pb), cadmium (Cd), and nickel (Ni), were all beneath the regulatory thresholds stipulated by the GB16889 and GB18598 criteria, signifying a notably effective solidification outcome. During the geopolymerization process, gel phases such as calcium aluminosilicate hydrate (C-A-S-H) and calcium silicate hydrate (C-S-H) are formed within the geopolymer matrix. This leads to the formation of a compact and cohesive cementitious material, which showcases superior mechanical strength and a robust capacity for heavy metal sequestration. This research contributes to the safe management of MSWI fly ash by not only facilitating its non-hazardous disposal but also enabling the efficient containment and elimination of heavy metals, chloride ions, and elemental aluminum.

Solidification/stabilization of organic matter and ammonium in high-salinity landfill leachate concentrate using one-part fly ash-based geopolymers

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Codisposal of landfill leachate concentrate and antimony mine soils using a one-part geopolymer system for cationic and anionic heavy metals immobilization

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

The Long-Term Leaching Behavior of Heavy Metals in Geopolymers and Portland Cement Bricks Containing Mswi Fly Ash: A Comparative Study

The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer.

Solidification and Immobilization of MSWI Fly Ash Through Aluminate Geopolymerization: Based on Partial Charge Model Analysis.

Development of Foamed Geopolymer with Addition of Municipal Solid Waste Incineration Fly Ash

Enhanced geopolymerization of MSWI fly ash through combined activator pretreatment: A sustainable approach to heavy metal encapsulation and resource recovery

Preparation of functional geopolymers from municipal solid waste incineration fly ash: An approach combining experimental and computational simulation studies

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

Coupled microwave hydrothermal dechlorination and geopolymer preparation for the solidification/stabilization of heavy metals and chlorine in municipal solid waste incineration fly ash

Challenges and engineering application of landfill leachate concentrate treatment

A novel method of calcium dissolution-crystallization-polymerization for stabilization/solidification of MSWI fly ash

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Effects of ladle slag on Class F fly ash geopolymer: Reaction mechanism and high temperature behavior

Immobilization of MSWI Fly Ash Through Geopolymerization: Effects of Water-Wash

Immobilizatiaon of heavy metals in municipal solid waste incineration fly ash with red mud-coal gangue

Early solidification/stabilization mechanism of heavy metals (Pb, Cr and Zn) in Shell coal gasification fly ash based geopolymer

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism