Abstract:This study presents an energy dissipation model based on the self-heating effect for rapidly evaluating high-cycle fatigue parameters of 304 L stainless steel (SS) produced by laser powder bed fusion (LPBF). To obtain the two-dimensional temperature field evolution and verify the model accuracy, the conventional and stepped fatigue loading procedures were carried out with the in-situ monitoring of an infrared camera. Numerical simulations of the surface temperature fields during fatigue process were performed to investigate the effect of material geometry and material thermodynamics parameters (such as specific heat and thermal conductivity coefficient) on the self-heating effect. In addition, to explore the role of cellular substructures of LPBF 304 L SS in energy dissipation and fatigue deformation mechanisms, the cell-free samples with no additional microstructural modifications were prepared by annealing process. The experimental results indicate that the model-predicted S-N curves are in good agreement with the experimental data. Under low-stress amplitudes, the entangled dislocations on the cellular substructures remained completely stable (without damped vibration) during cyclic deformation due to the pinning of misorientation, segregated atoms, and inclusions, thus not contributing to energy dissipation from anelastic mechanism. On the other hand, the cellular substructures improved the microstructural stability (such as high angle grain boundaries) by back stress strengthening, thus increasing the fatigue limit. This work contributes significant value to LPBF technology by providing a novel alternative method for fatigue life prediction and understanding the role of cellular substructure in energy dissipation and fatigue performance. Data availability The raw/processed data required to reproduce these findings cannot be shared at this time as the data also forms part of an ongoing study.

Fatigue life evaluation and cellular substructure role of laser powder bed fused 304 L steel based on dissipative deformation mechanisms

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Creep-fatigue Properties and Deformation Mechanism of 316L Steel Fabricated by Laser Powder Bed Fusion (PBF-LB/M)

Fatigue and tensile deformation behaviors of laser powder bed fused 304L austenitic stainless steel

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

An Approach to Estimate the Low Cycle Fatigue Probabilistic Curves of PBF-LB/M 316L Steel from Small Size Datasets Using the Remora Optimization Algorithm

Effect of scanning speed on fatigue behavior of 316L stainless steel fabricated by laser powder bed fusion

High Cycle Fatigue Behavior of 316L Steel Fabricated by Laser Powder Bed Fusion: Effects of Surface Defect and Loading Mode

Characterization of Low Cycle Fatigue Performance of New Ferritic P92 Steel at High Temperature: Effect of Strain Amplitude

Dissipative and thermal aspects in cyclic loading of additive manufactured AISI 316L

A multi-scale experimental investigation for fatigue limit and fatigue crack initiation behavior of powder bed fusion-laser beam 316L stainless steel

Influence of Prior Low Cycle Fatigue on Microstructure Evolution and Subsequent Creep Behavior

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Fatigue life prediction model for shot-peened laser powder bed fused 304L steel considering residual stress relaxation and defect distribution

Microstructure and Fatigue Behavior of Laser-Powder Bed Fusion Austenitic Stainless Steel

A multi-scale experimental investigation on fatigue crack propagation rate behavior of powder bed fusion-laser beam 316L stainless steel subjected to various heat treatments

Fatigue behavior of selective laser melted 316L stainless steel: experiments and modeling

Rotating Bending Fatigue of Laser Powder Bed Fused 316L Stainless Steel at Various Stress Levels: Microstructural Evaluation and Predictive Modeling

Fatigue life prediction for LPBF-fabricated Ti-6Al-4V up to very-high-cycle regime based on continuum damage mechanics incorporating effect of defects

Effects of Building Direction and Loading Mode on the High Cycle Fatigue Strength of the Laser Powder Bed Fusion 316L