Optimal design of liquid cooling structure with bionic leaf vein branch channel for power battery
Feifei Liu,Yangyang Chen,Wu Qin,Jun Li
DOI: https://doi.org/10.1016/j.applthermaleng.2022.119283
IF: 6.4
2023-01-05
Applied Thermal Engineering
Abstract:Effective thermal management is crucial for the thermal safety and uniformity of lithium-ion (Li-ion) batteries caused by high temperature. However, it is challenging for structural design and optimization method of cooling system especially considering dynamic heat generation of the battery. The liquid cooling plate with the bionic leaf vein branch (BLVB) channel which is sandwiched with a pouch Li-ion battery was proposed. The effects of multi-parameter coupling with inlet flow rate(M), channel width(D), channel angle(α) and channel number(N) of the cooling plate on the maximum temperature (Tmax), the maximum temperature difference (ΔTmax) of battery and the average pressure drop of coolant (ΔPavg) were investigated by using the orthogonal test range method. Based on the non-dominated sorting genetic algorithm-II (NSGA-II), the solution sets were optimized. Results show that the proposed BLVB channel is efficient for battery cooling. Even at 3 C discharge, Tmax can be controlled within 33.34 °C. Meanwhile, M and D are the main factors affecting the cooling performance, α and N are the secondary factors. However, with the increasing of α or the decreasing of N, Tmax and ΔTmax are decreased due to the enhancement of backflow or vortexes near the outlet. The optimal results are Tmax = 30.31 °C, ΔTmax = 2.78 °C and ΔPavg = 0.50 kPa; while the optimal parameters are M = 0.10 m/s, α = 159°, N = 15 and D = 2.60 mm. Compared with the initial BLVB channel and the traditional parallel straight channel, Tmax with the optimum BLVB channel can be reduced by 0.23 °C and 1.12 °C respectively when M = 0.10 m/s. The corresponding ΔTmax is declined by 0.28 °C and 1.64 °C, and ΔPavg is decreased by 65.56 % and 8.77 % respectively. The proposed BLVB channel can be used to provide a certain reference for the thermal design of battery liquid cooling system.
energy & fuels,engineering, mechanical,thermodynamics,mechanics