Abstract:Extrusion-based three-dimensional (3D) printing methods are preferred and emerging approaches for freely digital fabrication of ceramics due to ease of use, low investment, high utilization of materials, and good adaptability to multi-materials. However, systematic knowledge still lacks an explanation for what is their 3D printability. Moreover, some uncontrollable factors including extrudate shape retention and nonuniform drying inevitably limit their industrial applications. The purpose of this research was to present a new shaping retention method based on mathematical synthesis modeling for extrusion-based 3D-printing of ceramic pastes. Firstly, the steady-state equilibrium equation of the extrusion process was derived to provide clearer theoretical indications than purely experimental methods. Furthermore, a mathematical description framework was synthesized to better understand the extrusion-based 3D-printing of ceramic pastes from several realms: pastes rheology, extrudability, shape-holdability, and drying kinetics. Secondly, for eliminating shaping drawbacks (e.g., deformation and cracks) originating from non-digital control factors, we put forward a digital shape-retention technology inspired by the generalized drying kinetics of porous materials, which was different from existing retention solutions, e.g., freezing retention, thermally induced gelation, and using removable support structures. In addition, we developed an in situ hot air flow drying device easily attached to the nozzle of existing 3D printers. Confirmatory 3D-printing experiments of thin-walled cone-shape benchmark parts and the fire arrowhead-like object clearly demonstrated that the presented shape-retention method not only upgraded layer-by-layer forming capability but also enabled digital control of extrudate solidification. In addition, many more experimental results statistically showed that both fully solid parts and purely thin-wall parts had higher dimensional accuracy and better surface quality than the offline drying method. The 3D printed ceramic products with complex profiled surfaces conceivably demonstrated that our improved extrusion-based 3D-printing process of ceramic pastes has game-changing potentials beyond the traditional craftsmanship capacity.

Embedded 3D Printing of Architected Ceramics via Microwave‐activated Polymerization

Three-Dimensional Printing of Ceramics through "Carving" a Gel and "Filling in" the Precursor Polymer

Customized Nanostructured Ceramics via Microphase Separation 3D Printing

Photopolymerization-Based Three-Dimensional Ceramic Printing Technology

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

On enhancing the manufacturability and conversion of additively manufactured polymer-derived ceramics

Sophisticated Structural Ceramics Shaped from 3D Printed Hydrogel Preceramic Skeleton

UV-assisted Robotic Arm Freeforming of SiOC Ceramics from a Preceramic Polymer

3D printing of unsupported multi-scale and large-span ceramic via near-infrared assisted direct ink writing

Photopolymerization-based additive manufacturing of ceramics: A systematic review

Lithography-based additive manufacturing of ceramics: Materials, applications and perspectives

Fabrication of ceramics using photosensitive slurries: A comparison between UV-casting replication and vat photopolymerization 3D printing

Fabrication and characterisation of ceramics via low-cost DLP 3D printing

Design and Manufacturing of Si-Based Non-Oxide Cellular Ceramic Structures through Indirect 3D Printing

3D printing of ceramics with controllable green‐body configuration assisted by the polyvinyl alcohol‐based physical gels

Extrusion-Based 3D Printing of Ceramic Pastes: Mathematical Modeling and In Situ Shaping Retention Approach

Ceramic 3D Printing via Dye-Sensitized Photopolymerization Under Green LED

Lightweight and geometrically complex ceramics derived from 4D printed shape memory precursor with reconfigurability and programmability for sensing and actuation applications

Programmable Ceramic 4D Printing Via Multi-Material Vat Photopolymerization

Employing a combination of direct ink writing and near-infrared-induced photopolymerization facilitates 3D printing of unsupported multi-scale ceramics: The bone tissue engineering approach

Additive manufacturing of polymer derived ceramics: Materials, methods, and applications