Abstract:In aqueous rechargeable zinc-ion batteries (ARZIBs), aqueous electrolytes tend to initiate structure changes of metal oxides and conductive agents of the electrode, which leads to rapid capacity degradation. In this work, we report an artificial cathode–electrolyte interface (CEI) composed of paraffin that provides a trade-off between Zn2+ intercalation kinetics and stability of the cathode materials. Such paraffin-based CEI can either suppress Mn2+ dissolution and hence stabilize MnO2, or prevent water contact with conductive graphite to maintain its morphology and carbonaceous structure. As a result, the assembled aqueous Zn//MnO2 and Zn//ZnMn2O4 full battery with paraffin-based CEI delivered a superior capacity retention of 82% and 81% after 1000 cycles, 67% and 48% higher than the battery without CEI, respectively. More importantly, both Zn//MnO2 and Zn//ZnMn2O4 full battery also exhibit exceptional cycling stability even at a very high cathode mass loading of 23.6 and 25.2 mg cm–2, respectively, which offers an ideal capacity retention of 73% and 78% after 5000 cycles. Such a unique CEI design on the cathode surface provides a general strategy to improve the cycle life of ARZIBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00252.Fitting results of electrochemical impedance; FTIR spectrum of an alkane containing 20–40 carbon atoms; SEM of the cross-sectional view of the paraffin on the MnO2 cathodes; Nyquist plots of experimental and fitting data for the blank and cathodes after two CV cycles; Cyclic performance of cathodes; SEM of the blank and cathodes after 1000 cycles; Photograph of a large battery with high mass loading; High-resolution XPS of C 1s and O 1s; ICP testing of the ZnSO4 electrolyte collected from the cycled batteries; Contribution ratios of various valence states for Mn ions; XRD patterns of the blank and cathodes collected from the charge states; SEM and XRD pattern of ZnMn2O4; Cycle voltammograms of ZnMn2O4 cathode; Nitrogen adsorption/desorption isotherms and pore size distribution of ZnMn2O4; Contact angle test result of the ZnMn2O4 cathode; SEM images of the MnO2 cathode with different magnification resolution; XRD of the MnO2 powder; Nitrogen adsorption/desorption isotherms and pore size distribution of MnO2. PDF)This article has not yet been cited by other publications.

Paraffin Based Cathode–Electrolyte Interface for Highly Reversible Aqueous Zinc-Ion Battery

Polyacrylic Acid Assisted Synthesis of Free-Standing MnO2/CNTs Cathode for Zinc-ion Batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

MnO2@CeO2 composite cathode for aqueous zinc-ion batteries: enhanced electrical conductivity and stability through Mn–O–Ce bonds

Boosting the Cycling Stability of Aqueous Zinc-Ion Batteries through Nanofibrous Coating of a Bead-like MnOx Cathode

Low‐Cost Multi‐Function Electrolyte Additive Enabling Highly Stable Interfacial Chemical Environment for Highly Reversible Aqueous Zinc Ion Batteries

Hydrophobic Interface Engineering for Highly Reversible and Stable Zn Anodes

Interface Engineering to Improve the Rate Performance and Stability of the Mn-Cathode Electrode for Aqueous Zinc-Ion Batteries

Ultrafast Zinc–Ion–Conductor Interface toward High‐Rate and Stable Zinc Metal Batteries

Tailoring MnO2 Cathode Interface via Organic–Inorganic Hybridization Engineering for Ultra‐Stable Aqueous Zinc‐Ion Batteries

In-situ constructed interface buffer layer enabled highly reversible Zn Deposition/Stripping for long-lifespan aqueous zinc metal anodes

Enabling stable MnO2 matrix for aqueous zinc-ion battery cathodes

Carbon nanofiber-coated MnO composite as high-performance cathode material for aqueous zinc-ion batteries

Highly reversible Zn anodes enabled by in-situ construction of zincophilic zinc polyacrylate interphase for aqueous Zn-ion batteries

MnO 2 Nanowires Anchored with Graphene Quantum Dots for Stable Aqueous Zinc-Ion Batteries

Electrodeposited ε-MnO 2 on carbon fibers as an ideal cathode material for aqueous zinc-ion batteries

Interfacial Designing of MnO2 Half-Wrapped by Aromatic Polymers for High-Performance Aqueous Zinc-Ion Batteries

An Artificial MnWO4 Cathode Electrolyte Interphase Enabling Enhanced Electrochemical Performance of δ-MnO2 Cathode for Aqueous Zinc Ion Battery

Ferroelectric-Enhanced cathode kinetics toward High-Performance aqueous Zinc-Ion batteries

Robust Hybrid Solid Electrolyte Interface Induced by Zn‐Poor Electric Double Layer for A Highly Reversible Zinc Anode