In Situ Stress Evolution and Fault-Slip Tendency Assessment of an Underground Gas Storage Reservoir in the Turpan Basin (China): In Situ Stress Measurements and Coupled Simulations

Jingqi Zhang,Yixiang Fan,Wenchao Liu,Huituan Liu,Bin Xu

DOI: https://doi.org/10.1007/s00603-023-03477-y

IF: 6.518

2023-08-04

Rock Mechanics and Rock Engineering

Abstract:Fault slip induced by gas injection and extraction cycles in underground gas storage (UGS) sites have been reported in many countries. Knowledges of the contemporary in situ stress condition and its evolution with gas injection and extraction cycles are crucial to estimate the fault-slip tendency ( ). Using the Wx-1 UGS reservoir in the Turpan Basin (China) as an example, we studied the evolution of the stress state and fault-slip tendency associated with the injection and extraction cycles. To assess the minimum horizontal stress ( S hmin ) in the storage reservoir and its caprock, we conduct flowback-assisted minifrac tests to measure the magnitudes. The magnitudes of maximum horizontal stress ( S hmax ) were estimated and constrained by multiple sources. The 3D in situ stress field was constructed by the finite-element method (FEM), constrained by field stress measurements. Using coupled reservoir–geomechanical simulations, we estimated the changes in stress state over time and the tendency for fault slip in response to gas injection and extraction. The results showed that (1) the in situ stress state at Wx-1 UGS field is a strike-slip (SS) faulting stress state; (2) for fault-slip analysis, decoupled analysis considering only the pore pressure-induced fault slip can overestimate the pore pressure needed to cause the fault slip ( ), while coupled analysis using a poroelastic FEM formulation considers both pore pressure and injection-induced shear stress changes and can provide more reasonable estimates of ; (3) both the mean effective stresses ( ) and shear stresses ( ) changes with the injection and extraction cycles; (4) the fault-slip tendency increases continuously with gas injection and decreases with gas extraction; (5) the faults striking at low angles with respect to the orientation of Shmax are critically stressed in the contemporary in situ stress field, and the possibility of injection-induced fault slippage is the controlling factor of the maximum operation pressure (MOP) of this UGS site.

geosciences, multidisciplinary,engineering, geological