Abstract:This study considers the differences in the operating modes of compressed air energy storage and natural gas storage during the horizontal docking of salt mines with old cavities. It investigates the long‐term stability of salt cavity surrounding rock under different internal pressure differences and injection‐production frequencies, and introduces the correction results of elastic modulus damage factor to determine the deformation, expansion safety factor, volume shrinkage rate, plastic zone volume, equivalent strain, and tensile stress of the surrounding rock. This can provide reference significance for the rational reuse of abandoned salt mine cavities. The long‐term cyclic gas injection and production mode of the gas storage will lead to accelerated deformation of the surrounding rock of the old cavity, and even the instability and failure of the cavity. Considering the geological conditions and cavity measurement data of the old cavity of the horizontal butted‐well in China, the deformation and failure characteristics of the long‐term cyclic injection‐production process of the surrounding rock of the old cavity under different internal pressure difference and injection‐production frequency are studied. The long‐term stability of the gas storage is predicted by six indexes: the deformation of surrounding rock, dilatancy safety factor, volume shrinkage rate, plastic zone volume, equivalent strain, and no tensile stress. The results show that with the increase of operation duration and cycle times, the deformation, volume shrinkage rate, and plastic zone volume of the surrounding rock gradually increase after the old cavity is reconstructed into the gas storage and the difference of results under different UGS and CAES gradually expands. The stability of the surrounding rock of the old cavity under the cycle action of CAES will be lower. The number of cycles has a limited impact on the stability of the surrounding rock of the old cavity, while the operation duration and injection‐production pressure are the main determinants of the stability of the surrounding rock of the old cavity. If the old cavity of the salt mine is reconstructed into CAES, the parameters such as the number of cycles, the operation duration, and the injection‐production pressure still need to be considered comprehensively. The research results can provide reference value for the reasonable design of the gas storage pressure range of the old cavity and the safety and stability evaluation of the surrounding rock.

Semi-analytical assessment of dynamic sealing capacity of underground gas storage: A case of Songliao Basin, Northeastern China

Experimental study on dynamic sealing capacity and safe threshold of caprock in underground gas storages

In Situ Stress Evolution and Fault-Slip Tendency Assessment of an Underground Gas Storage Reservoir in the Turpan Basin (China): In Situ Stress Measurements and Coupled Simulations

Evaluation of Caprock Sealing Performance for CO2 Saline Aquifer Storage: A Numerical Study

Caprock sealing integrity and key indicators of CO 2 geological storage considering the effect of hydraulic-mechanical coupling - X field in the Bohai Basin, China

Experiment and prediction for dynamic storage capacity of underground gas storage rebuilt from hydrocarbon reservoir

Deformation Characteristics and Permeability Properties of Cap Rocks in Gas Storage of Depleted Reservoirs under Alternating Load

Influence of supercritical CO2-H2O-caprock interactions on the sealing capability of deep coal seam caprocks related to CO2 geological storage: A case study of the silty mudstone caprock of coal seam no. 3 in the Qinshui Basin, China

Numerical Simulation of Gas Leakage in Bedded Salt Rock Storage Cavern

Experimental Study on the Evolution Law of Breakthrough Pressure of Mudstone Cap under Alternating Load

Critical drawdown pressure prediction for sanding production of underground gas storage in a depleted reservoir in China

Stability evaluation of underground gas storage salt caverns with micro-leakage interlayer in bedded rock salt of Jintan, China

Tightness and stability evaluation of salt cavern underground storage with a new fluid–solid coupling seepage model

Stability Analysis of a Typical Salt Cavern Gas Storage in the Jintan Area of China

Permeability characteristics of mudstone cap rock and interlayers in bedded salt formations and tightness assessment for underground gas storage caverns

Influence mechanism of brine-gas two-phase flow on sealing property of anisotropic caprock for hydrogen and carbon energy underground storage

Underground Gas Storage Process Optimization Using Integrated Subsurface Characterization, Dynamic Modeling and Monitoring - A Case Study

Study on the influence of injection pressure and frequency on the deformation and damage law of the surrounding rock in the old cavity of salt mine

Geomechanical Model Test Of Underground Caverns In Salt Rock

Experimental measurements and characterization models of caprock breakthrough pressure for CO 2 geological storage