Microscopic experimental study on the reaction of shale and carbon dioxide based on dual energy CT mineral recognition method

Zhenglan Li,Yihe Du,Yonggang Duan,Yu Peng,Jiyu Li,Shibo Ma,Kamy Sepehrnoori
DOI: https://doi.org/10.1016/j.fuel.2024.131874
IF: 7.4
2024-05-20
Fuel
Abstract:With the continuous improvement of carbon emission requirements and the promotion of the strategic position of shale gas energy, CO 2 flooding shale gas technology has become one of the key technologies to reduce carbon emission and improve the recovery efficiency of shale gas wells. After carbon dioxide enters the shale reservoir, a series of physical and chemical reactions will occur under the combined influence of water and temperature, resulting in a decrease in the mechanical strength of the shale and a change in reservoir properties such as porosity. The cores always are destroyed by the previous mineral identification method, which is hard to achieve the analysis without hurt for reaction depth, location and the three-dimensional change of pore structures of the same sample. Therefore, this manuscript establishes a set of shale mineral identification method based on the dual-energy CT theory which is verified by using sandstones and reaction experiments. The three-dimensional digital cores and mineral distribution of six shale samples are gotten by this method. The samples are carried out carbon dioxide-water-rock reaction experiments, and the influences of different water, temperature and reaction time on reaction are clarified, the maximum reaction depth of the reaction between CO 2 and shale with water under 30 °C is 50.9 μm, the depth with water under 80 °C is 152 μm, and the reaction depth of different size samples with water under 30 °C for 60 days are 220 μm and 195 μm respectively. The results show that carbon dioxide can hardly react with shale without water, and with the increase of temperature, the rate of CO 2 -water-shale reaction increases. Larger samples have a larger surface area and more minerals participate in heterogeneous surface reactions, resulting in more minerals being ultimately dissolved. After the reaction, the porosity of the shale surface is significantly improved, and its permeability will be greatly enhanced.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?