Abstract:In the last few years, there has been an increase in the use of eco-friendly materials in the area of acoustics made from natural fibers. These materials are preferable to synthetic materials because of their benefits, such as raw material availability, cost-effective processing costs, safe handling, and equivalent acoustic qualities. The main objective of this study is to find out how well the material made from vetiver grass absorbs sound. Following the International Standard ISO 354-2003 and ASTM 423-90, sound absorption tests were done in a reverberation chamber to find the Sound Absorption Coefficient (SAC) and Noise Reduction Coefficient (NRC) over a wide range of frequencies from 100–4000 Hz. To enhance the way the material absorbs noise, several ASTM E795-16 mountings were examined and tested. These mountings, which have air cavity sizes ranging from 0 mm (hard base) to 50, 100, and 300 mm, include J, E600, C50, D10, and C10. The most effective technique to enhance the material's acoustic qualities to lower noise was identified by comparing the SAC and NRC readings of samples with various-sized air gaps. The fitting of C10 with a SynthPF 10 × 50 back and a 50 mm air gap produced the best results (NRC 0.82). The produced porous pine boards with a density of 400 kg/m3 and a width of 20 mm met all the physical and mechanical property standards of the Indian Standards. The study shows that noise-absorbing materials made from vetiver grass could be used in buildings in ways that are better for the environment.

Investigation of sound absorption capability of pine (Pinus densiflora) cone particles

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Experimental Study on Acoustical Characteristics of Pine Nut with Open and Closed Shells

Use of Pine (Pinus densiflora) Pollen Cones as an Environmentally Friendly Sound-Absorbing Material

Sound Absorption Behaviour of Vetiver Grass Fibre-based Manufactured Pine Board

Exploring sound absorption properties of porous wood-based eco-friendly materials for noise reduction in buildings

Acoustical Behavior Of Camellia Sinensis / Ananas Comosus Fiber Based Uni-Directional Corrugated Panel For Sound Damping Application

Acoustic properties of glubam and SPF

An investigation of sound absorption characteristics of Cocos nucifera fiber composite using Taguchi design

Sound Absorption by Tree Bark

Sound Absorption Coefficient of Different Green Materials Polymer on Noise Reduction

Sustainable Rigid Polyurethane Foam from Wasted Palm Oil and Water Hyacinth Fiber Composite—A Green Sound-Absorbing Material

Investigation of the pore structure and sound-absorbing capability of the Chinese parasol tree (Firmiana simplex (L.) W.Wight) and Chinese tulip poplar (Liriodendron chinense) transverse sections as eco-friendly, porous, sound-absorbing materials

Influence of Particle Size and Bulk Density on Sound Absorption Performance of Oil Palm Frond-Reinforced Composites Particleboard

Utilization and Study of Raw Groundnut Shell as a Source of Sound Absorbing Material

Sound Absorption Characterisation of Layered Arrangements of Pineapple Leaf Fiber-Epoxy Composite prepared by a Simple Mixing – Hot Pressing Process

Comparison of the sound absorption properties of acoustic absorbers made from used copy paper and corrugated board

Sound Absorption Properties of Natural Fibers: A Review

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Developments of Sound Absorption of Fine Performance Polyurethane-based Porous Composite Materials

Acoustic performance of flexible polyurethane composite foams filled with melamine particles