Abstract:This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced using a compression molding technique. According to ASTM standards, the acoustics, thermal conductivity, and physical characteristics of the composite samples were tested to assess their qualities. The impedance tube method detailed in ASTM E1050 was used to determine the sound absorption coefficients (SAC) for acoustics. The SAC values were measured at six frequencies such as 125, 250, 500, 1000, 2000, and 4000 Hz. The results showed that composite samples made from waste cotton and pigeon pea demonstrated sound absorption values of greater than 80%. Superior sound insulation and absorption, moisture absorption, fiber properties have also been demonstrated by waste composites. Especially, the waste cotton/pea stalk waste fiber composites achieved over 75% sound absorption, while the waste 28% composites performed well in terms of sound absorption, moisture absorption, and fiber properties. Even in humid conditions, the composite samples constructed from used cotton and pigeon pea stalks demonstrated good moisture resistance without reducing their insulating qualities. Soundproofing barriers are composite layers of foam or pigeon pea/cotton. 本研究研究了以 100/0、70/30、60/40、50/50、30/70 和 0/100 等不同比例混合的复合材料、木豆茎和棉纤维的合成和表征。这些复合材料是使用压缩成型技术生产的。根据 ASTM 标准,对复合材料样品的声学、导热性和物理特性进行了测试,以评估其质量。 ASTM E1050 中详述的阻抗管方法用于确定声学吸声系数 (SAC)。 SAC值是在125、250、500、1000、2000和4000Hz等六个频率下测量的。结果表明,由废棉和木豆制成的复合材料样品的吸声值大于80%。废旧复合材料也表现出了优越的隔音吸音、吸湿、纤维特性。特别是废棉/豌豆秆废纤维复合材料的吸声率达到75%以上,而废28%复合材料在吸声、吸湿和纤维性能方面表现良好。即使在潮湿的条件下,由用过的棉花和木豆秆制成的复合材料样品也表现出良好的防潮性,而不会降低其绝缘性能。隔音屏障是泡沫或木豆/棉的复合层。

Acoustical Behavior Of Camellia Sinensis / Ananas Comosus Fiber Based Uni-Directional Corrugated Panel For Sound Damping Application

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

An investigation of sound absorption characteristics of Cocos nucifera fiber composite using Taguchi design

Exploration of Voids, Acoustic Properties and Vibration Damping Ratio of Cyperus Pangorei Rottb Fiber and Ramie Fiber Reinforced with Epoxy Resin Hybrid Composites

Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Sound absorption performance of a micro perforated sandwich panel with honeycomb-hierarchical pore structure core

Heterogeneously perforated honeycomb-corrugation hybrid sandwich panel as sound absorber

Application of Cellulose and Paper-Based Products in Building Acoustics

Finite Element Analysis on Acoustic and Mechanical Performance of Flexible Perforated Honeycomb-Corrugation Hybrid Sandwich Panel

Acoustic Characteristics of Jute and Coir Non-woven Fabric

Ultralight micro-perforated sandwich panel with hierarchical honeycomb core for sound absorption

Sound Absorption Coefficient of Different Green Materials Polymer on Noise Reduction

Sound Absorption Performance of Ultralight Honeycomb Sandwich Panels Filled with "Network" Fibers- Juncus effusus

Comparison of the sound absorption properties of acoustic absorbers made from used copy paper and corrugated board

Small perforations in corrugated sandwich panel significantly enhance low frequency sound absorption and transmission loss

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Sound Insulation of Corrugated-Core Sandwich Panels: Modeling, Optimization and Experiment

Investigation on the Acoustic Absorption of Flexible Micro-Perforated Panel with Ultra-Micro Perforations

A study on the new PET composite sound-absorbing material applicable to automotive interior materials

Sound absorption coefficient measurement and analysis of bio-composite micro perforated panel (BC-MPP)