Abstract:A serious risk that harms the safe use of water and affects aquatic ecosystems is water pollution. This occurs when the water's natural equilibrium is disrupted by an excessive amount of substances, both naturally occurring and as a byproduct of human activities, that have varied degrees of toxicity. Radiation from Cs isotopes, which are common components of radioactive waste and are known for their long half-lives (30 years), which are longer than the natural decay processes, is a major source of contamination. Adsorption is a commonly used technique for reducing this kind of contamination, and zeolite chabazite has been chosen as the best adsorbent for cesium in this particular situation. The purpose of this research is to investigate a composite material based on magnesium phosphate cement (MPC). Magnesium oxide (MgO), potassium dihydrogen phosphate (KH2PO4), and properly selected retarders are used to create the MPC. The optimal conditions for this composite material are investigated through the utilization of X-ray diffraction, scanning electron microscopy, BET surface area analysis, and atomic absorption spectroscopy. The principal aim is to enable innovations in the elimination of radioactive waste-contaminated water using effective cesium removal. The most promising results were obtained by using KH2PO4 as an acid, and MgO as a base, and aiming for an M/P ratio of two or four. Furthermore, we chose zeolite chabazite as a crucial component. The best adsorption abilities for Cs were found at Qads = 106.997 mg/g for S2 and Qads = 122.108 mg/g for S1. As a result, zeolite is an eco-friendly material that is a potential usage option, with many benefits, such as low prices, stability, and ease of regeneration and use.

Zirconosilicate Sorbent Based on Waste Fly Ash Cenospheres for Cesium Immobilization in a Ceramic Form

Effective Removal of Cesium by New Functionalized 1,3-Alternate Calixcrown Materials Immobilized on a Silica Carrier

Retention of cesium from aqueous solutions using synthetic zeolites produced from power plant ash

Immobilization of strontium and cesium by aluminosilicate ceramics derived from metakaolin geopolymer-zeolite A composites via 1100 °C heating treatment

Immobilization Behavior of Cerium Ions in the Zirconolite Ceramic Solidified Radioactive Waste Forms

Physical, Thermal, and Chemical Properties of Fly Ash Cenospheres Obtained from Different Sources

Immobilization of simulated cesium wastes in ceramic matrices derived from some natural minerals

Stable Solidification of Silica-based Ammonium Molybdophosphate in Ceramic Matrices and Its Cesium-leaching Properties

Study on stable solidification of silica-based ammonium molybdophosphate adsorbing cesium: Micromechanics and density functional theory modeling

A New Approach for Impregnation of Cs into Zirconia Microsphere Matrix

Stable Solidification of Cesium with an Allophane Additive by a Pressing/sintering Method

Cesium Immobilization in Perovskite-Type Ba1-x(La, Cs)xZrO3 Ceramics by Sol-Gel Method

Selective adsorption and stable solidification of radioactive cesium ions by porous silica gels loaded with insoluble ferrocyanides

Synthesis of analcime from fly ash and its adsorption of Cs+ in aqueous solution

Preparation and Properties of Situ-Sintered SiC Ceramics Aided by ZnO-Al2O3-CaO

Study on cesium crystallization solidification in fly ash based cesium zeolite

Recovery of cenospheres from solid waste produced by coal-fired power plants

Sorption of cesium and gadolinium ions onto zirconium silico antimonate sorbent from aqueous solutions

A new route to the stable capture and final immobilization of radioactive cesium

Study on the Immobilization of Cesium Absorbed by Copper Ferrocyanide Using Allophane Through Pressing/sintering Method

Advancing in Cesium Retention: Application of Magnesium Phosphate Cement Composites