Abstract:High temperature thermal conductivity up to 1200 °C and the electrical conductivity up to 800 °C were studied for (Zr-Ta-W-Ti)C-SiC (ZTaWT-S) based high entropy carbide ceramics containing carbonaceous reinforcements (multi-walled carbon nanotubes (CNT), graphite flakes (G), and graphene nanoplatelets (GNP). The thermal diffusivity (0.055–0.067 cm −2 s) and specific heat capacity (0.38–0.44 Jg −1 K −1 ) were experimentally measured from 50 °C to 1200 °C for all the composites. The thermal conductivity of the composites lies in the range of 18.2 Wm −1 K −1 to 22.9 Wm −1 K −1 for the temperature range of 50 °C-1200 °C, from the significant phonon scattering at the interfaces of the elements of different size and atomic masses. At 50 °C, the limited thermal conductivity enhancement for carbonaceous reinforcements from 18.2 Wm −1 K −1 for ZTaWT-S to 21.0 Wm −1 K −1 for ZTaWT-SC (CNT reinforcement) to 20.8 Wm −1 K −1 for ZTaWT-SG (graphite reinforcement), and to 19.9 Wm −1 K −1 ZTaWT-SGNP (graphene reinforcement) is attributed to the high thermal resistance at the interfaces between different phases and interface with carbon additives, evident in the TEM investigation of the crushed sintered sample, and at the grain boundaries (interfacial thermal resistance). The phonon and electron contribution to thermal conductivity were also assessed and the κe/κexp ratio analysis confirms the predominant role of phonon contribution to thermal conductivity (∼65%) at low temperature (∼50 °C) and of electronic contribution at high temperatures (∼800 °C) as the dominant mechanism of thermal transport in the investigated composites and ZTaWT-SGNP composite with the highest κe/κexp ratio of 0.84 (extrapolated) emerges as the most electronically conductive material.

Crossover of thermal conductivity in SiC-reinforced ZrB2–HfB2 composites at elevated temperatures

Thermal and Electrical Transport in ZrB2-SiC-WC Ceramics Up to 1800 °C

Ultrahigh‐temperature tensile behaviors of ZrB2–SiC ceramics

Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2-20SiC based ultra-high temperature ceramic composites

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Ablation behaviour of ultra-high temperature ceramic matrix composites: Role of MeSi2 addition

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics

Preparation and properties of zirconium diboride-based ultra-high temperature ceramics

High‐Temperature Oxidation at 1900°C of ZrB2–xSiC Ultrahigh‐Temperature Ceramic Composites

ZrB2 and ZrB2–based Ceramics

Properties and Microstructure of an HfB2-HfC-SiC Ultra High Temperature Ceramics

Thermal shock behavior of ZrB2–SiC ultra-high temperature ceramics with addition of zirconia

Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C

Thermal shock behavior of SiC-whisker-reinforced diboride ultrahigh-temperature ceramics

High-temperature Oxidation Behavior of Monolithic Zr3[Al(Si)]4C6 and Its Composite Incorporating 30vol% ZrB2-SiC: Providing a Basis for Broadening the Service Temperature

Elevated temperature thermal and electrical properties of carbon nanotubes, graphite and graphene reinforced (Zr-Ta-W-Ti)C-SiC based high entropy carbide ceramics

Single-cycle thermal shock resistance of ZrB2–SiCnp ceramic composites

Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C

Long‐term oxidation and ablation behavior of Cf/ZrB2–SiC composites at 1500, 2000, and 2200°C