Abstract:To eliminate the shortcomings in the grouting sleeve and other connection forms in precast concrete shear wall structure induced by the poor grouting, difficult quality assurance, low construction efficiency, and high cost, a new type of monolithic assembled concrete shear wall structure with non-connected vertical distributed reinforcement was proposed in this paper. The new shear wall structure is composed of middle precast wall panels and cast-in-place boundary members. The vertical distributed reinforcement in the middle precast wall panels is not connected between the upper and lower floors. This technique was based on the normal section bearing capacity of equal strength and inclined section bearing capacity of equal strength compared with the cast-in-place shear wall structure. Three full-scale models of precast shear walls and one cast-in-place contrast specimen were tested for their seismic performance under pseudo-static loading. All precast specimens are cast based on the manufacture specification of the factory. By analysis of test results, including the failure modes, load-lateral drift hysteresis curves, bearing capacity, hysteretic characteristics, deformation components, ductility, rigidity degeneration, energy dissipation, and strain distribution, all the specimens were obtained and compared. Comparisons between test results indicate that the proposed shear walls have a similar bearing capacity as that of the cast-in-place shear wall and improved energy dissipation and ductility. Moreover, the specimen with inclined reinforcement performs better in drift capacity compared to companion specimens. The contribution of flexural deformation to the total displacement of each specimen is the largest, follow by the contribution of shear deformation, and the contribution of slip is the smallest. The strain of non-connected vertical distributed reinforcement of the precast panel did not yield during the loading process. The cross-section of the precast shear wall panel conforms to the assumption of plane cross-section according to the strain distribution before the reinforcement yields.

Cyclic response of precast concrete shear walls with reduced grouted sleeves or corrugated metallic duct splices

Out‐of‐plane response of prefabricated concrete shear walls connected via grouted sleeves

Cyclic performance of precast concrete shear walls with a mortar–sleeve connection for longitudinal steel bars

Cyclic Behavior of Different Connections in Precast Concrete Shear Walls: Experimental and Analytical Investigations

Study on Seismic Performance of Precast Shear Wall Structure Connected by Sleeve and Threaded Rod Connectors

Seismic performance of precast short-leg shear wall using a grouting sleeve connection

Seismic performance of precast shear wall with sleeves connection based on experimental and numerical studies

Experimental study of the hysteretic behavior of prefabricated frame-shear wall structures with grouting sleeve connections

Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement

Cyclic Loading Experiments on Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns

Subassemblage Tests on Seismic Behavior of Double-Corrugated-plate Shear Walls

Seismic performance of precast concrete shear walls with spiral stirrup restrained grout-anchored lapped reinforcement connection

Experimental study on seismic performance of precast concrete shear walls with defective and repaired grouted sleeve

Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns Subjected to Cyclic Loading

Seismic Performance of Precast Short-Limb Shear Wall with the Bundled Connection at Different Axial Compression Ratios

Seismic performance of innovative prefabricated reinforced recycled concrete shear walls

Evaluation of the seismic performance of novel bundled connections precast shear walls under cyclic loading

Experimental and Analytical Studies of Prefabricated Composite Steel Shear Walls under Low Reversed Cyclic Loads

Cyclic Tests and Performance of Weak-Axis Connected Uncoupled and Coupled Steel Plate Shear Wall with Novel Infill Plate Configuration

Global Experimental Response of a Three-Story, Full-Scale Precast Concrete Shear Wall Structure with Reinforcing Bars Spliced by Grouted Couplers

Seismic Behaviour of PC-encased HCSC Composite Shear Walls under Vertical Tension and Horizontal Cyclic Loading