Abstract:Aiming to the issue of the unclear mechanism and lack of design basis for the influence of the deformation of the damping component installed in the brake pads of high-speed train, various perforated configurations were implemented on the damping component to obtain different typical deformation. The damping component was then installed on the back of the friction block and the tests on friction braking were performed using a test rig designed to assess high-speed train braking performance. A finite element model (FEM) was established for wear simulation to obtain block worn surfaces that closely matched the test results, succeeded by conducting both complex eigenvalue analysis (CEA) and implicit dynamic analysis (IDA). The findings indicate that the perforated configurations effectively provided damping components with different deformation capabilities, and increasing the deformation weakened its damping effect on vibration. The damping component deformation not only significantly affected the non-uniform wear on the block surface but also altered the wear patterns. Inappropriate deformation exacerbated the degree of non-uniform wear, leading to complex abrasive wear and adhesive wear, and added to the interface damage. Therefore, the damping component deformation significantly altered the friction-induced vibration and noise (FIVN) characteristics. Enhancing the deformation disrupted the continuity of FIVN but intensified its strength. The major reason is that the damping component deformation determined the time length of its compression and rebound, and inappropriate deformation significantly amplifying the oscillation intensity of contact area and friction force. This posed a challenge in establishing stable contact at the braking interface, ultimately leading to the generation of intense FIVN. Installation of damping components in brake pad to improve interface contact characteristics and suppress FIVN should carefully consider the structural of the braking system, and design damping components with appropriate deformation. Otherwise, it may lead to opposite effects.

Improved design and performance analysis of vibration damping device for railway freight bogie

Oblique impact dynamic analysis of wedge friction damper with Dankowicz dynamic friction

Experimental and numerical research on the bogie hunting of a high-speed train caused by the empty stroke of yaw damper

Numerical and experimental study on adaptive stiffness yaw damper for suppressing abnormal vibration of high-speed trains

Hunting stability and dynamic stress analysis of a high-speed bogie using elastic-suspended motors as dynamic vibration absorber

Optimum Analysis of Vibration Reduction Performance for Floating Slab Track Based on Shear Hinge

Effect of Dowel Joints on Dynamic Behavior of Train–discrete Floating Slab Track System

An investigation of high-frequency vibration of bogie frame due to wheel/rail short-pitch irregularities and its control methodologies

The role of the damping component deformation in improving the tribological behavior at the high-speed train braking interface

Improving the stability of high-speed trains using an innovative passive yaw damper

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Dynamics analysis of higher speed bogie with inner axle box bogie

Research on Load Reverse Engineering and Vibration Fatigue Analysis Technology of Rapid Box Wagon

A detailed experimental study of the validity and applicability of slotted stand-off layer rail dampers in reducing railway vibration and noise

Optimisation of Longitudinal Seismic Energy Dissipation System for Straddle-type Monorail-Cum-Road Long-Span Cable-Stayed Bridge

Study on the Effect of Damping Asymmetry of the Vertical Suspension on the Railway Bogie Vibrations

Experimental study of bogie instability monitoring and suppression measures for high-speed EMUs

Damping Coefficient Optimization for the Articulated System of Virtual Track Trains

Fatigue Life Evaluation of a Railway Vehicle Bogie Using an Integrated Dynamic Simulation

Evaluation of frictional suspension system performance in three-piece bogie by the multi-body-system approach

Research on the Vibration Insulation of High-Speed Train Bogies in Mid and High Frequency