Abstract:This research explores the synergistic impacts of grape stalk–derived lignin biopolymer and Celosia cristata microfiber reinforcement in polymer composites, examining their effects on mechanical, wear, thermal conductivity, and flammability properties. The stir-casting method is employed during the fabrication process to amalgamate the biopolymer and microfiber seamlessly within a polymer matrix. Rigorous characterization of test specimens follows ASTM standards, ensuring meticulousness and reliability in assessing the composite properties. Among the array of composites crafted, the composite combination of vinyl ester, Celosia cristata fiber, and lignin biopolymer 2vol.%(VCL2) stands out by delivering optimal mechanical strength. This composite exhibits a tensile strength of 135 MPa, flexural strength of 169 MPa, compression strength of 154 MPa, and impact energy of 5.84. Despite a decline in mechanical strength for vinyl ester, Celosia cristata fiber, and lignin biopolymer 4 vol.% (VCL3), the incorporation of lignin enhances rigidity, resulting in improved Shore-D hardness, reaching a value of 85. The heightened rigidity and hardness contribute to enhanced wear resistance in VCL3, which displays a low wear rate of 0.01 mm3/Nm and a coefficient of friction (COF) of 0.26. Regarding thermal conductivity, the presence of lignin acts as a thermal barrier, thereby reducing the thermal conductivity of VCL3 to 0.15 W/mK. Similarly, in flammability tests, lignin acts as a barrier, forming a protective char layer that curtails flame propagation. Consequently, VCL3 demonstrates high flame resistance with a flame propagation speed of 6.24 mm/min, obtaining a V-0 rating for vertical testing and an HB rating for horizontal testing according to UL-94 standards. In summary, this study not only delves into the mechanical and wear properties of the composites but also explores their thermal conductivity and flammability characteristics. The incorporation of grape stalk–extracted lignin biopolymer and Celosia cristata microfibers in polymer composites exhibits promising outcomes, paving the way for potential applications in industries where these enhanced properties are essential.

Grape stalk cellulose toughened plain weaved bamboo fiber-reinforced epoxy composite: load bearing and time-dependent behavior

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Effects on mechanical, wear, thermal, and flammability of vinyl ester–based composite reinforced with biopolymer made from grape stalk and microfiber from Celosia cristata

Bamboo fiber‐reinforced epoxy composites fabricated by vacuum‐assisted resin transfer molding (VARTM): Effect of molding sequence and fiber content

Experimental investigation of mechanical properties and morphology of bamboo-glass fiber-nanoclay reinforced epoxy hybrid composites

Characterization of vinyl ester–based biocomposites using grape stalk lignin biopolymer and Celosia cristata stem fibers: a characterization study

Highly-aligned Cellulose Fibers Reinforced Epoxy Composites Derived from Bulk Natural Bamboo

Enhancing sustainable composites: isolation of nanocellulose from Selenicereus undatus (dragon fruit) and kenaf fiber reinforcement in vinyl ester matrix—a study on mechanical, wear, fatigue, creep, and dynamic mechanical properties

Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties

Physical and Mechanical Properties of Bamboo Fiber/Glass Fiber Mesh Reinforced Epoxy Resin Hybrid Composites: Effect of Fiber Stacking Sequence

Enhancing vinyl ester composites with biocarbon from pineapple leaf fiber and dragon fruit peel waste: a characterization study

Effect of silane-treated lignin and hybrid bamboo-green pea sheath fiber on mechanical, wear, and wettability behavior of epoxy structural composite

Physical and Mechanical Characterization of Bamboo Fiber/Groundnut Shell/Copper Particle/MWCNT-Filled Epoxy Hybrid Polymer Nanocomposites

Physical-Mechanical Properties of Bamboo-Textile-Reinforced Polymer Made with Vacuum-Assist Resin Transfer Molding

Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/ epoxy composites

Eco‐friendly recycled glass fiber and bamboo fiber reinforced epoxy‐SiO2 polymer hybrid composite: Development and mechanical characterization

Synthesis and characterization of Borassus flabellifer flower waste-generated cellulose fillers reinforced PMC composites for lightweight applications

Load-Bearing and Machining Behavior of Treated Nano-sorghum-Millet-Husk-Biosilica- and Kenaf-Fiber-Reinforced Vinyl Ester Composite

Thermo-chemical synthesis of microcrystalline cellulose from fibrous root of cassava tuber and reinforcement effect on banana-polyester composite

Reinforcing and Toughening Effects of Bamboo Pulp Fiber on Poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) Fiber Composites