Abstract:Three-dimensional (3D) printing technology is serving as a promising approach of fabricating titanium (Ti) and its alloys used for bone tissue engineering. However, the biological inertness nature of Ti material limits its capability to bind directly with the bone tissue. This paper aims to enhance the bioactivity and osteogenesis of 3D printed Ti-6Al-4V implants by constructing a hierarchical micro/nano-topography on the surface. Ti-6Al-4V implants were prepared by the electron beam melting (EBM) technique. A method combining ultrasonic acid etching with anodic oxidation is proposed for surface modification of EBM Ti-6Al-4V implants in this study. The acid etching step was to remove any existent residual powders on the implant's surface and construct micro-pits and-grooves on the EBM microrough surface. Nanotube arrays with a diameter of 40-50 nm were superimposed on the micro-structured substrate via anodic oxidation. The results of in vitro experiments showed that the hierarchical micro/nano-structured surface on Ti-6Al-4V after acid etching and anodic oxidation (AN) promoted the proliferation and osteogenic differentiation of pre-osteoblast cells (MC3T3-E1) via enhancing the surface hydrophilicity and bioactivity compared with the polished Ti surface (P). Micro-CT and histological analysis were used to assess the in vivo osteogenic properties enhancement. The results 8 weeks after the surgery showed the ratio of bone volume to total volume (BV/TV) of AN implant was 43.4%, which represented 1.5 times that of as-printed implants (AM) without any post-treatment. Considerable increment of bone-to-implant contact area was also detected from the micro-CT reconstructed 3D models in comparison with AM implants and acid etched (AE) EBM implants. In conclusion, the hierarchical micro/nano topography generated on the EBM native surface showed an improvement of bioactivity and osteogenic properties, which is expected to accelerate the application of 3D printed orthopedic and dental implants in clinics. Statement of significance: Traditional titanium implants have the nature of biological inertness, which limits their capability to bind directly with the bone tissue. The failure of implants after couple of years of implantation will cause huge pain to the patients. In this work, a surface modification method for 3D printed implants was developed to construct a hierarchical micro/nano-structure. Through the in vitro and in vivo experiments, we proved that this hierarchical micro/nano-structure induced a better promotion effect on osteoblast proliferation and differentiation comparing with untreated surface or polished surface, and was also capable of bolstering the new bone formation, suggesting a potent strategy to improve the biological properties of 3D printed titanium implants. The work is expected to accelerate the application of 3D printed orthopedic and dental implants in clinics.

Research progress on surface modification of three-dimensional printing porous titanium alloys

Advanced Surface Modification for 3D-Printed Titanium Alloy Implant Interface Functionalization

A Comprehensive Review of Surface Modification Techniques for Enhancing the Biocompatibility of 3D-Printed Titanium Implants

Research progress of surface modification techniques of porous titanium alloy for medical use

Porous titanium alloys for medical application: Progress in preparation process and surface modification research

Surface modification improving the biological activity and osteogenic ability of 3D printing porous dental implants

Research Progress on Mechanical Properties of 3D Printed Biomedical Titanium Alloys

Antibacterial Structure Design of Porous Ti6Al4V by 3D Printing and Anodic Oxidation

Functionalization of 3D-printed titanium alloy orthopedic implants: a literature review

Review on 3D Printing of Biomedical Titanium Alloy

Surface Modification of Biomedical Ti and Ti Alloys: A Review on Current Advances

Effect of micro-arc oxidation surface modification of 3D-printed porous titanium alloys on biological properties

Research Progress of the Surface Modification of Titanium and Titanium Alloys for Biomedical Application

Surface modification of porous titanium and titanium alloy implants manufactured by selective laser melting: A Review

Research Status of Biomedical Porous Ti and Its Alloy in China

Review on Corrosion Characteristics of Porous Titanium Alloys Fabricated by Additive Manufacturing

Enhanced osseointegration and antimicrobial properties of 3D-Printed porous titanium alloys with copper-strontium doped calcium silicate coatings

3D Printed Ti–6Al–4V Implant with a Micro/Nanostructured Surface and Its Cellular Responses

Application and Research of Titanium Alloy Human Implants Prepared by 3D Printing

Effect of 3D-Printed Porous Titanium Alloy Pore Structure on Bone Regeneration: A Review

Improved Osseointegration of 3D Printed Ti-6Al-4V Implant with a Hierarchical Micro/nano Surface Topography: an in Vitro and in Vivo Study.