Abstract:In this study, the potentiometric arrayed glucose biosensors, which were based on zinc oxide (ZnO) or aluminum-doped zinc oxide (AZO) sensing membranes, were fabricated by using screen-printing technology and a sputtering system, and graphene oxide (GO) and Nafion-glucose oxidase (GOx) were used to modify sensing membranes by using the drop-coating method. Next, the material properties were characterized by using a Raman spectrometer, a field-emission scanning electron microscope (FE-SEM), and a scanning probe microscope (SPM). The sensing characteristics of the glucose biosensors were measured by using the voltage-time (V-T) measurement system. Finally, electrochemical impedance spectroscopy (EIS) was conducted to analyze their charge transfer abilities. The results indicated that the average sensitivity of the glucose biosensor based on Nafion-GOx/GO/AZO was apparently higher than that of the glucose biosensor based on Nafion-GOx/GO/ZnO. In addition, the glucose biosensor based on Nafion-GOx/GO/AZO exhibited an excellent average sensitivity of 15.44 mV/mM and linearity of 0.997 over a narrow range of glucose concentration range, a response time of 26 s, a limit of detection (LOD) of 1.89 mM, and good reproducibility. In terms of the reversibility and stability, the hysteresis voltages (VH) were 3.96 mV and 2.42 mV. Additionally, the glucose biosensor also showed good anti-inference ability and reproducibility. According to these results, it is demonstrated that AZO is a promising material, which could be used to develop a reliable, simple, and low-cost potentiometric glucose biosensor.

Fabrication and Characterization of MgO-Based Enzymatic Glucose Biosensors

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Construction of flexible enzymatic electrode based on gradient hollow fiber membrane and multi-wall carbon tubes meshes.

Potentiometric MgO Film pH Sensor Measurement Analysis and Integrated Flexible Printed Circuit Board

Nonenzymatic glucose sensor based on nickel(II)oxide/ordered mesoporous carbon modified glassy carbon electrode

Preparation of the Glucose Sensor Based on Three-Dimensional Ordered Macroporous Gold Film and Room Temperature Ionic Liquid

A Facile Fabrication of a Potentiometric Arrayed Glucose Biosensor Based on Nafion-GOx/GO/AZO

Study of the Glucose Sensor Based on Potentiometric Non-Enzymatic Nafion/CZO Thin Film

Amperometric biosensors based on carbon paste electrodes modified with nanostructured mixed-valence manganese oxides and glucose oxidase.

Fabrication of MnOx/Ni(OH)2 Electro-Deposited Sulfonated Polyimides/graphene Nano-Sheets Membrane and Used for Electrochemical Sensing of Glucose

Preparation of magnetic Fe 3 O 4 /PPy@ZIF-8 nanocomposite for glucose oxidase immobilization and used as glucose electrochemical biosensor

Enzyme-chitosan hydrogels for high sensitivity flexible silk-based electrochemical glucose sensor

Glucose biosensor based on glucose oxidase immobilized on a nanofilm composed of mesoporous hydroxyapatite, titanium dioxide, and modified with multi-walled carbon nanotubes

An Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the ZnO Nanotubes

Facile Preparation of Mesocellular Graphene Foam for Direct Glucose Oxidase Electrochemistry and Sensitive Glucose Sensing

Glucose Oxidase/Nano-ZnO/Thin Film Deposit FTO as an Innovative Clinical Transducer: A Sensitive Glucose Biosensor

Fabrication of an Amperometric Biosensor Based on the Immobilization of Glucose Oxidase in a Modified Molecular Sieve Matrix

A Novel Bienzyme Glucose Biosensor Based on Three-Layer Au–Fe3O4@SiO2 Magnetic Nanocomposite

Glucose Oxidase Modified Electrode Fabricated by Layer-by-layer Molecular Deposition

Electrochemical Properties Analysis of Immobilized Glucose Oxidase on Multi-Walled Carbon Nanotubes and Hydroxy-Fullerene Nanocomposites

Design of an amperometric glucose oxidase biosensor with added protective and adhesion layers