Abstract:The increasing number of photovoltaic (PV) panels installed worldwide requires solutions for their disposal at their end-of-life. PV modules contain several valuable metals like copper and silver as well as toxic ones like lead used in solder. Another valuable component are silicon wafers, because of their high purity, which is obtained in energy and resource intensive production processes. Many recycling procedures, however, are downcycling processes that do not recover these components, but rather are based on shredding and landfilling the modules or obtaining only one of those materials. Often, nitric acid is used as leaching agent for the recovery of silver and copper resulting in harmful NO x emissions that necessitate additional gas treatment. We present an alternative electrochemical process by which leaching reagents are generated on boron-doped diamond electrodes as anode material, which are ideal for this task due to their high overpotential for the oxygen evolution reaction. By evaluating different electrolytes, sulfuric acid was found to be suitable by generating peroxydisulfate (S2O82−). With its standard redox potential of +2.0 V, it is possible to oxidize rather noble metals like silver. To evaluate the efficiency of the process S2O82− was generated from sulfuric acid in an H-cell setup and the leaching rate of copper, silver and tin was investigated and optimized by varying acid concentration and current density. Efficient leaching of all metals was achieved in 5 M sulfuric acid at 200 mA/cm2. The feasibility of the process for real waste streams was demonstrated by disassembling PV modules and leaching busbars and silver coatings from wafers. The complete removal of the metal coatings from the residual wafers was confirmed by EDX. A significant advantage of the process with S2O82− as leaching agent is, that the reaction with metals forms sulfate that can be oxidized again within a cyclic process driven by electricity as displayed in figure 1. Additionally, the metals can be recovered by electrowinning from the etching solution within the same cell. This was demonstrated by recovering Ag, Cu and Sn from sulfuric acid solution. By using potentiostatic conditions it was additionally possible to separate the metals by consecutively plating them in the order of their respective redox potentials. Leached metals from PV waste were recovered electrochemically with 99 % and 88 % yield for Cu and Ag, respectively. Sn could not be plated due to the high amounts of persulfate present in solution, however recovery by precipitation is possible. Pb is obtained as undissolved residue during leaching, due to the extremely low solubility of PbSO 4 and PbO 2 . Aside from the H-cell experiments the generation of S2O82− and electrowinning was successfully investigated in a flow cell setup. This system benefits from a significantly decreased cell voltage making the process more energy efficient and allows easier upscaling towards industrial applications. The presented process is energy efficient as both electrode reactions are utilized and furthermore does not require the continuous addition of chemicals, therefore, making it an eco-friendly and sustainable alternative to conventional recycling methods. Figure 1: Scheme for the cyclic process of peroxydisulfate generation, leaching and electrowinning during the electrochemical recycling of PV waste. Figure 1

Recovery of crystalline silicon from waste solar cells by green deep eutectic solvent-hydrogen peroxide system

Recovery of silver from crystal silicon solar panels in Self-Synthesized choline Chloride-Urea solvents system

A High-Efficiency and Energy-Saving Method for Purifying Industrial Silicon for Silicone Use

Monocrystalline Silicon Wafer Recovery Via Chemical Etching from End-of-Life Silicon Solar Panels for Solar Cell Application

Nondestructive silicon wafer recovery by a novel method of solvothermal swelling coupled with thermal decomposition

A comprehensive hydrometallurgical recycling approach for the environmental impact mitigation of EoL solar cells

Ix 1 Simultaneous Determination of Retinol and a-Tocopherol in Serum or Plasma by Liquid Chromatography Submitters :

Recycling of silicon from waste PV diamond wire sawing silicon powders: A strategy of Na2CO3-assisted pressure-less sintering and acid leaching

A systematically integrated recycling and upgrading technology for waste crystalline silicon photovoltaic module

An Electrochemical Process for the Recovery of Metals and High Purity Silicon from Photovoltaic Modules

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

Membrane-mediated interactions between nanoparticles on a substrate.

Purification of Organosilicon Waste Silicon Powder with Hydrometallurgy

Recycling of diamond-wire sawing silicon powder by direct current assisted directional solidification

Efficient and comprehensive recycling of valuable components from scrapped Si-based photovoltaic panels

Review of Silicon Recovery from Diamond Wire Saw Silicon Powder Waste Based on Hydrometallurgical Process

Efficient Recovery of Silver and Aluminum from End-of-Life Photovoltaics: A Two-Step Leaching Approach

Development of eco-friendly pretreatment processes for high-purity silicon recovery from end-of-life photovoltaic modules

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Silver Recovery from Crystalline Silicon Photovoltaic Solar Cells using Continuous Stirred‐Tank Reactors

A new strategy for de-oxidation of diamond-wire sawing silicon waste via the synergistic effect of magnesium thermal reduction and hydrochloric acid leaching