Abstract:Most previous studies on nonlinear Lamb waves are conducted using mode pairs that satisfying strict phase velocity matching and non-zero power flux criteria. However, there are some limitations in existence. First, strict phase velocity matching is not existed in the whole frequency bandwidth; Second, excited center frequency is not always exactly equal to the true phase-velocity-matching frequency; Third, mode pairs are isolated and quite limited in number; Fourth, exciting a single desired primary mode is extremely difficult in practice and the received signal is quite difficult to process and interpret. And few attention has been paid to solving these shortcomings. In this paper, nonlinear S0 mode Lamb waves at low-frequency range satisfying approximate phase velocity matching is proposed for the purpose of overcoming these limitations. In analytical studies, the secondary amplitudes with the propagation distance considering the fundamental frequency, the maximum cumulative propagation distance (MCPD) with the fundamental frequency and the maximum linear cumulative propagation distance (MLCPD) using linear regression analysis are investigated. Based on analytical results, approximate phase velocity matching is quantitatively characterized as the relative phase velocity deviation less than a threshold value of 1%. Numerical studies are also conducted using tone burst as the excitation signal. The influences of center frequency and frequency bandwidth on the secondary amplitudes and MCPD are investigated. S1–S2 mode with the fundamental frequency at 1.8 MHz, the primary S0 mode at the center frequencies of 100 and 200 kHz are used respectively to calculate the ratios of nonlinear parameter of Al 6061-T6 to Al 7075-T651. The close agreement of the computed ratios to the actual value verifies the effectiveness of nonlinear S0 mode Lamb waves satisfying approximate phase velocity matching for characterizing the material nonlinearity. Moreover, the ratios derived from the primary and secondary horizontal displacements generated from nonlinear S0 mode Lamb waves are closest to the real value, which indicates that using horizontal displacements is more suitable for detecting evenly distributed microstructural changes in large thin plate-like structure. Successful application to evaluating material at different levels of evenly distributed fatigue damage is also numerically conducted.

A numerical study of Lamb wave localization in thin plates using a passive co-linear phased array

Acoustics Vector Sensor Linear Array Passive Ranging Based on Waveguide Invariant

Studies of waveguide invariant passive ranging of acoustics vector sensor line array

Detection and localization of closely distributed damages via lamb wave sparse reconstruction

A Robust Lamb Wave Imaging Approach to Plate-Like Structural Health Monitoring of Materials with Transducer Array Position Errors

A New Time of Flight Extraction Method for Narrowband Lamb Wave in Metallic Plate

Air Ultrasonic Signal Localization with a Beamforming Microphone Array

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

Leakage Source Localization Method for Aerospace Composite Structures Based on U-Array Wave Velocity-Compensated Beamforming

Experimental and Numerical Investigation of Acoustic Emission Source Localization Using an Enhanced Guided Wave Phased Array Method

THE ESTIMATION OF THE LAMB WAVE PHASE VELOCITY DISPERSION CURVES BASE ON K- MEANS CLUSTERING ALGORITHM

An accurate measurement method of lamb wave phase velocity based on clustering algorithms

A Damage Localization Method With Multimodal Lamb Wave Based on Adaptive Polynomial Chirplet Transform

Investigation of Non-axisymmetric Lamb Wave in an Elastic Plate with Free Boundaries

Novel Baseline-Free Ultrasonic Lamb Wave Defect Location Method Based on Path Amplitude Matching

High-Resolution Ultrasonic Lamb Waves Dispersion Measurement and Plate Thickness Evaluation

Lamb Wave Imaging Via Dual-Frequency Fusion for Grating Lobe Effect Compensation

Analytical and numerical studies of approximate phase velocity matching based nonlinear S0 mode Lamb waves for the detection of evenly distributed microstructural changes

Pseudo-linear-array analysis of passive surface waves based on beamforming

Local Peaks Search Method for Solving Lamb Waves' Dispersion Equation of Laminated Structures and the Application

Lamb wave dispersion and anisotropy profiling of composite plates via non-contact air-coupled and laser ultrasound