Abstract:Three copolymer donors, PTVT‐T‐xCl (where x = 20%, 50%, 100%), were designed and synthesized in this work. As the chlorine content increases, the Voc of PTVT‐T‐xCl‐based OSCs is enhanced, accompanied by progressively reduced non‐radiative energy losses. Notably, the OSC comprising a blend of the completely non‐fused photovoltaic materials PTVT‐T‐20%Cl and A4T‐16 achieved a remarkable PCE of 11.8%. Comprehensive Summary The industrialization of organic solar cells (OSCs) faces challenges due to complex synthesis routes and high costs of organic photovoltaic materials. To address this, we designed and synthesized a series of polythiophene‐based donor materials, PTVT‐T‐xCl (20%Cl, 50%Cl and 100%Cl), by introducing different degrees of chlorine substitution within their conjugated skeletons. The incorporation of chlorine atoms does not change the planar conformation of the conjugated main chain of the control polymer, PTVT‐T, but effectively reduces their HOMO energy levels (≤ –5.3 eV) and alters the crystallinity of the polymers. In addition, when preparing OSC by blending with non‐fused electron acceptor A4T‐16, the non‐radiative energy loss of the three photovoltaic devices gradually decreased with the increase of chlorine content (0.343, 0.278 and 0.189 eV, respectively). Notably, PTVT‐T‐20%Cl exhibited a more moderate nanoscale phase separation with the acceptor, leading to efficient exciton dissociation, lower bimolecular recombination, and thus a favorable current in the OSCs. Consequently, the photovoltaic device based on PTVT‐T‐20%Cl:A4T‐16 achieved a remarkable photovoltaic efficiency of 11.8%. In addition, the PTVT‐T‐xCl series polymers show much lower material‐only‐cost (MOC) values than the other reported photoactive material systems. This work provides the way for the development of low‐cost photovoltaic materials and the industrial application of OSC, overcoming previous limitations posed by high energy losses in polythiophene‐based donors.

Optimized bicontinuous interpenetrating network morphology formed by gradual chlorination to boost photovoltaic performance

Chlorination of Conjugated Side Chains to Enhance Intermolecular Interactions for Elevated Solar Conversion

Enhanced Photovoltaic Performance by Synergistic Effect of Chlorination and Selenophene Π-Bridge

Chlorination of Side Chains: A Strategy for Achieving a High Open Circuit Voltage over 1.0 V in Benzo[1,2-b:4,5-b′]dithiophene-Based Non-Fullerene Solar Cells

Optimized energy level, morphology and photophysical procedure boosted the photovoltaic performance in monochlorinated benzothiadiazole-based polymer donors

Boosting Efficiency and Stability of Organic Solar Cells Using Ultralow-Cost BiOCl Nanoplates As Hole Transporting Layers.

19.10% Efficiency and 80.5% Fill Factor Layer‐by‐Layer Organic Solar Cells Realized by 4‐Bis(2‐thienyl)pyrrole‐2,5‐Dione Based Polymer Additives for Inducing Vertical Segregation Morphology

Overcoming the Trade-off Between Voc and Jsc: Asymmetric Chloro-Substituted Two-Dimensional Benzo[1,2-B:4,5-B′]dithiophene-based Polymer Solar Cells

Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials

Understanding the effect of chlorine substitution in all-polymer solar cells

Chlorinated Polythiophene‐Based Donors with Reduced Energy Loss for Organic Solar Cells

17.6%‐Efficient Quasiplanar Heterojunction Organic Solar Cells from a Chlorinated 3D Network Acceptor

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Modulating Chlorination Position on Polymer Donors for Highly Efficient Nonfullerene Organic Solar Cells

Multichloro-Substitution Strategy: Facing Low Photon Energy Loss in Nonfullerene Solar Cells

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Chlorinated Benzo[1,2‐b:4,5‐c′]dithiophene‐4,8‐dione Polymer Donor: A Small Atom Makes a Big Difference

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Chlorination strategy on polymer donors toward efficient solar conversions

Binary Organic Solar Cells with 19.2% Efficiency Enabled by Solid Additive

Revealing Morphology Evolution in Highly Efficient Bulk Heterojunction and Pseudo‐Planar Heterojunction Solar Cells by Additives Treatment