Abstract:Landfills require effective containment systems to prevent the leakage of leachate into the underground environment. Cutoff walls are commonly employed for this purpose, with options including rigid and flexible designs. In areas where structural strength is not a primary concern, flexible cutoff walls offer lower permeability and environmental benefits due to their lack of cement content, thereby reducing CO2 emissions. This study investigates the use of dredged sediment and attapulgite as materials for flexible cutoff walls. Through analyses of bound water content, free water content, hydraulic conductivity, and scanning electron microscopy, we explore the impact of confining pressures on cutoff wall permeability. Our findings reveal that the consolidation induced by confining pressure does not significantly alter the bound water content within the cutoff wall. Instead, changes in water content are predominantly attributed to variations in free water content. Under identical confining pressures, we observe a positive correlation between permeability and hydraulic gradient, with permeability increasing as the hydraulic gradient rises, and anti-permeability decreasing accordingly. Additionally, when holding the hydraulic gradient constant, increasing confining pressure leads to a continuous decrease in permeability. Microscopic analyses highlight that high confining pressure not only compresses pore diameter but also alters pore morphology, thereby influencing permeability. This study contributes to the understanding of cutoff wall behavior under different conditions. Our results demonstrate that increasing confining pressure during soil consolidation effectively reduces cutoff wall permeability to meet design standards. However, the influence of high leachate head on permeability should also be considered. These findings provide a more environmentally friendly and lower permeability option for landfill sites, which is significant for the design and enhancement of containment systems in landfill sites.

Using alkali-activated dredge sludge ash-bentonite for low permeability cutoff walls: The engineering properties and micromechanism

Hydraulic Conductivity of Compacted Manufactured Sand Tailings–bentonite Mixtures: a New Hydraulic Barrier Material

Saturated Hydraulic Conductivity of Compacted Steel Slag-Bentonite Mixtures--a Potential Hydraulic Barrier Material of Landfill Cover.

Laboratory Experiment on Formation of MICP Horizontal Seepage-Reducing Body in Confined Aquifer for Deep Excavation

Enhanced Organic Contaminant Retardation by CTMAB-Modified Bentonite Backfill in Cut-Off Walls: Laboratory Test and Numerical Investigation

Study on hydraulic conductivity of dredged sediment-attapulgite vertical cutoff walls under confining pressure

Engineering Characteristics and Microscopic Mechanism of Soil–Cement–Bentonite (SCB) Cut-Off Wall Backfills with a Fixed Fluidity

Comparative research on the application of slag as an alternative to cement in binder-bentonite cutoff wall backfills

Recycling of phosphogypsum and red mud in low carbon and green cementitious materials for vertical barrier

Role of bentonite in improving the anti-seepage durability of fly ash-based geopolymer cutoff wall backfill under dry–wet cycles

Hydraulic conductivity and compressibility of polyanionic cellulose-modified sand-calcium bentonite slurry trench cutoff wall materials

Study on the hydraulic conductivity of plastic concrete vertical cutoff walls

Study on the carbon sequestration performance and barrier mechanism of biochar cement-based vertical cutoff walls for phenol pollution in groundwater

Heavy metals containment by vertical cutoff walls backfilled with novel reactive magnesium-activated slag-bentonite-sand: Membrane and diffusion behavior

Study on barrier mechanism and application of silico-alkaline sol-modified bentonite cutoff wall materials to lead pollution in lead-zinc tailings pond

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Engineering performance and microscale structure of activated high titanium slag-soil-cement-bentonite (HTS-SCB) slurry backfill

Performances of the Soil–Bentonite Cutoff Wall Composited with Geosynthetic Clay Liners: Large-Scale Model Tests and Numerical Simulations

Alkali-activated red mud in stabilizing marine dredged clay with low amount of cement

Study on the Mechanical and Leaching Characteristics of Permeable Reactive Barrier Waste Solidified by Cement-Based Materials

Hydro-mechanical behavior and microstructure evolution of red clay-bentonite backfills