Abstract:Native lignin, a major structural polymer in lignocellulosic biomass, offers unique advantages as a feedstock for high-performance bio-based polymeric materials. In this work, depolymerized native lignin was utilized as a polyol in the synthesis of rigid bio-based polyurethane (PU) foams. Lignin in Pinus radiata wood was subjected to a pilot-scale hydrogenolysis process to obtain a depolymerized native lignin oil that was composed of monomers, dimers, and oligomers of predominant dihydroconiferyl alcohol and 4-propyl guaiacol. These lignin-derived polyols had low molecular weight, high hydroxyl group content, and good copolyol solubility, all of which were advantageous factors in preparing PU foams. The whole lignin oil, or fractions of the oil, was incorporated into PU foams by substituting sorbitol polyether polyol at 12.5–50 wt % to boost the bio-based content. Substituting with lignin-derived polyols led to foams with similar densities and thermal properties and substantially improved compression properties. The monomeric-/dimeric-rich fraction of the lignin oil, when incorporated at 33 or 50 wt % of the polyol, led to 100 and 61% improvements in compression modulus and strength in the resulting PU foams. The dimeric polyols in the lignin oil were principally responsible for enhancing the resistance of the foam to mechanical compression. These findings provide insights into how native lignin can be valorized via a lignin-first approach to produce rigid PU foam materials with an enhanced mechanical robustness and bio-based content.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsapm.1c01081.Chemical characterization of lignin-derived polyols by GPC, 1H NMR, and FTIR spectroscopy; PU foam formulation, chemistry, and foaming properties; and FTIR spectra and thermal and compression properties of PU foams (PDF)This article has not yet been cited by other publications.

Chemical recycling of a lignin-based non-isocyanate polyurethane foam

Materials for the biorefinery: high bio-content, shape memory Kraft lignin-derived non-isocyanate polyurethane foams using a non-toxic protocol

What to do with Polyurethane waste? - The environmental potential of chemically recycling Polyurethane rigid foam

Closed-Loop Recycling of Lignin-Based Sustainable Polymers with an All-Hydrocarbon Backbone

Bio-based non-isocyanate polyurethane with closed-loop recyclability and its potential application

Biobased Ultralow-Density Polyurethane Foams with Enhanced Recyclability

A strong, biodegradable and recyclable lignocellulosic bioplastic

Renewable and Biodegradable Polyurethane Foams with Aliphatic Diisocyanates

Lignin-Based Polyurethanes: Opportunities for Bio-Based Foams, Elastomers, Coatings and Adhesives

Preparation of Mechanically Robust Bio-Based Polyurethane Foams Using Depolymerized Native Lignin

Closed-loop recycling of polyethylene-like materials

Chemical upcycling of commodity thermoset polyurethane foams towards high-performance 3D photo-printing resins

Polyurethane Foam Chemical Recycling: Fast Acidolysis with Maleic Acid and Full Recovery of Polyol

CO2 and Lignin‐Based Sustainable Polymers with Closed‐Loop Chemical Recycling

Chemical Recycling of Waste Polyurethane Foams: Efficient Acidolysis under the Catalysis of Zinc Acetate

Recycling of Polyurethane Foams via Glycolysis: A Review

Sustainable and scalable synthesis of acetal-containing polyols as a platform for circular polyurethanes

Toward Circular Recycling of Polyurethanes: Depolymerization and Recovery of Isocyanates

Biodegradation and up-cycling of polyurethanes: Progress, challenges, and prospects

Chemically Recyclable and Mechanically Robust Non-isocyanate Polyurethane from Resveratrol

Lignin demethylation enabled robust and reprocessable bio-polyurethane elastomer with adaptable cross-linking network