Abstract:This study explores the enhancement of hydrogen production via dry reforming of methane (DRM) using nickel catalysts supported on metalized silica-alumina. By incorporating noble metals (Ir, Pd, Pt, Ru, and Rh), we significantly improve the catalysts' reducibility, basicity, and resistance to coke deposition. Our novel approach integrates a predictive model combining advanced statistical and experimental techniques to optimize catalyst performance. The active site population derived from the reduction of the NiAl 2 O 4 phase is found to be stable and least affected under oxidizing gas stream (CO 2 ) as well as reducible gas stream (H 2 ) during the DRM reaction. The catalyst system is characterized by surface area and porosity, X-ray diffraction, Raman spectroscopy, thermogravimetry analysis, XPS, TEM, and various temperature-programmed reduction/desorption techniques (TPR/CO 2 -TPD). Notably, the 5Ni/1IrSiAl catalyst shows reduced activity due to low reducibility and basicity, whereas the 5Ni/1RhSiAl catalyst demonstrates superior performance, achieving a hydrogen yield of 62% at 700 °C and 80% at 800 °C after 300 minutes. This enhancement is attributed to the highest edge of reducibility, the maximum concentration of stable active sites "Ni" (derived from NiAl 2 O 4 during the DRM reaction), and the optimum concentration of moderate strength basic sites. Through the application of multiple response surface methodology and central composite design, we developed a predictive model that forecasts the optimal conditions for maximizing hydrogen yield, which was experimentally validated to achieve 95.4% hydrogen yield, closely aligning with the predicted 97.6%. This study not only provides insights into the mechanistic pathways facilitated by these catalysts but also demonstrates the efficacy of computational tools in optimizing catalytic performance for industrial applications.

Properties-activity correlation of Nickel supported on fibrous Zeolite-Y for dry reforming of methane

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

Dry reforming of methane over Ni/fibrous Zeolite-Y: optimization and regeneration studies

Unveiling the catalytic performance of unique core-fibrous shell silica-lanthanum oxide with different nickel loadings for dry reforming of methane

Highly Efficient and Stable Methane Dry Reforming Enabled by a Single-Site Cationic Ni Catalyst

Highly dispersed nickel-tuned silica lanthana catalyst: Interplay of morphology and textural properties for hydrogen-rich syngas through the carbon dioxide reforming of methane

Small-sized Ni nanoparticles embedded nickel phyllosilicate as a metal-acid bifunctional zeolite catalyst for cooperatively boosting CO2-CH4 reforming

Iron-promoted zirconia-alumina supported Ni catalyst for highly efficient and cost-effective hydrogen production via dry reforming of methane

Ni-Based Molecular Sieves Nanomaterials for Dry Methane Reforming: Role of Porous Structure and Active Sites Distribution on Hydrogen Production

Confined High Dispersion of Ni Nanoparticles Derived from Nickel Phyllosilicate Structure in Silicalite-2 Shell for Dry Reforming of Methane with Enhanced Performance

Facile synthesis of highly disperse Ni-Co nanoparticles over mesoporous silica for enhanced methane dry reforming

A strategy of constructing the Ni@silicalite-1 catalyst structure with high activity and resistance to sintering and carbon deposition for dry reforming of methane

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

Integrating advanced fitting models with experimental catalysis to maximize H2 production in dry reforming using nickel on metalized-silica-alumina catalysts

Performance Study of Ni/Si-MCM-41 Catalysts, Synthesized with Different Silica Sources, and their Application on Methane Dry Reform to Produce Green Hydrogen

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Highly stable and coke-resistant Zn-modified Ni-Mg-Al hydrotalcite derived catalyst for dry reforming of methane: Synergistic effect of Ni and Zn

Recent advances in dry reforming of methane over Ni-based catalysts

Tuning metal-support interactions in nickel-zeolite catalysts leads to enhanced stability during dry reforming of methane

Enhancing dry reforming of methane with engineered SBA-15-supported Fe-Ni alloy nanoparticles for sustainable syngas production

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane