Abstract:The heterointerface engineering‐induced oxygen defects are introduced into heterostructure MnO2 (δa‐MnO2) by in situ electrochemical activation for aqueous zinc ion batteries. Finally, the refinement of the crystal structure of the cathode material significantly suppresses manganese dissolution, which is prevalent in manganese‐based cathode materials, resulting in no capacity degradation after 100 charge/discharge cycles at 0.5 A g−1. Manganese‐based material is a prospective cathode material for aqueous zinc ion batteries (ZIBs) by virtue of its high theoretical capacity, high operating voltage, and low price. However, the manganese dissolution during the electrochemical reaction causes its electrochemical cycling stability to be undesirable. In this work, heterointerface engineering‐induced oxygen defects are introduced into heterostructure MnO2 (δa‐MnO2) by in situ electrochemical activation to inhibit manganese dissolution for aqueous zinc ion batteries. Meanwhile, the heterointerface between the disordered amorphous and the crystalline MnO2 of δa‐MnO2 is decisive for the formation of oxygen defects. And the experimental results indicate that the manganese dissolution of δa‐MnO2 is considerably inhibited during the charge/discharge cycle. Theoretical analysis indicates that the oxygen defect regulates the electronic and band structure and the Mn‐O bonding state of the electrode material, thereby promoting electron transport kinetics as well as inhibiting Mn dissolution. Consequently, the capacity of δa‐MnO2 does not degrade after 100 cycles at a current density of 0.5 A g−1 and also 91% capacity retention after 500 cycles at 1 A g−1. This study provides a promising insight into the development of high‐performance manganese‐based cathode materials through a facile and low‐cost strategy.

Unraveling the high-performance oxygen-deficient amorphous manganese oxide as cathode for advanced zinc ion batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

Zinc‐Ion Batteries: Valence Engineering Via in Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery (adv. Energy Mater. 38/2020)

Defect Engineering of Oxygen‐Deficient Manganese Oxide to Achieve High‐Performing Aqueous Zinc Ion Battery

Dynamic Amorphous Zn0.17MnO2−n·0.52H2O Electrochemical Crystal Transition for Highly Reversible Zinc‐Ion Batteries with Ultrahigh Capacity and Long Lifespan

Enriching Oxygen Vacancy Defects Via Ag–O–Mn Bonds for Enhanced Diffusion Kinetics of Δ-Mno2 in Zinc-Ion Batteries

Amorphous Manganese Oxides: An Approach for Reversible Aqueous Zinc-Ion Batteries

Oxygen-Deficient β-MnO2@Graphene Oxide Cathode for High-Rate and Long-Life Aqueous Zinc Ion Batteries

Enriching Oxygen Vacancy Defects via Ag–O–Mn Bonds for Enhanced Diffusion Kinetics of δ-MnO 2 in Zinc-Ion Batteries

MnO 2 @Fe 2 O 3 Cathode for Aqueous Zinc/Manganese Batteries: Enhanced Discharge Capacity and Stability through Forming FeMnO 3

A Silver and Manganese Dioxide Composite with Oxygen Vacancies As a High-Performance Cathode Material for Aqueous Zinc-Ion Batteries.

Construction of MnO2 with oxygen defects as cathode material for aqueous zinc ion batteries

Oxygen-Deficient β-MnO<sub>2</sub>@Graphene Oxide Cathode for High-Rate and Long-Life Aqueous Zinc Ion Batteries

Oxygen Vacancies Enhance H + Diffusion Kinetics for a Flexible and Lightweight Aqueous Zinc/Manganese Monoxide Battery

Suppressing Manganese Dissolution in Potassium Manganate with Rich Oxygen Defects Engaged High‐Energy‐Density and Durable Aqueous Zinc‐Ion Battery

Constructing the Efficient Ion Diffusion Pathway by Introducing Oxygen Defects in Mn2O3 for High-Performance Aqueous Zinc-Ion Batteries

Heterointerface Engineering‐Induced Oxygen Defects for the Manganese Dissolution Inhibition in Aqueous Zinc Ion Batteries

High Valence MnO2 As an Aqueous Zinc Ion Battery Cathode Prepared Using a Secondary Hydrothermal Method.

In-situ oriented oxygen-defect-rich Mn-N-O via nitridation and electrochemical oxidation based on industrial-scale Mn<sub>2</sub>O<sub>3</sub> to achieve high-performance aqueous zinc ion battery

Electrochemical one-step synthesis of Mn3O4 with tunable oxygen defects for high-performance aqueous zinc-ion batteries