Abstract:High corrosion rate is the “Achilles' heel” of magnesium and its alloys, which has severely limited their applications. Coating on these kinds of materials is an effective way to overcome this weakness. Protective coatings were successfully synthesized on AZ31 magnesium alloy by the hydrothermal method with de-ionized water as mineralizer in this paper. The structure, morphology, and composition of the coatings were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy-dispersive spectroscopy (EDS), respectively. Potentiodynamic polarization tests and immersion tests for 7 and 14days in 3.5wt.% NaCl aqueous solution at room temperature were conducted to evaluate anti-corrosion abilities of coatings. The influences of hydrothermal temperature and time on the thickness of the coating and corrosion resistance were investigated. The results show that the coatings are uniform and compact, composed of hexagonal magnesium hydroxide (Mg(OH)2) and a spot of monoclinic aluminum magnesium hydroxide (Mg2Al(OH)7). The thickness of coating varied from 2.2μm to 27.2μm, increasing with the hydrothermal temperature and time. Polarization curves and results of immersion tests of coated and uncoated AZ31 substrates demonstrate that coatings can improve the corrosion resistance effectively and the corrosion resistances are mainly increased with the thicknesses of the coatings and increased with hydrothermal temperature if the thicknesses are very close to each other. The static water contact angles of the coatings are all less than 13.5°, whereas that of the substrate is 40.5°, indicating that the coatings are highly hydrophilic. Tape test further verifies that there is a strong adhesion between the coating and the substrate.

Preparation of corrosion-resistant hydrophobic composite films on magnesium alloy

Superhydrophobic Corrosion-Resistant Coating of AZ91D Magnesium Alloy: Preparation and Performance

Novel composite films prepared by sol–gel technology for the corrosion protection of AZ91D magnesium alloy

Enhancing the Anti-Corrosion Performance and Biocompatibility of AZ91D Mg Alloy by Applying Roughness Pretreatment and Coating with In-Situ Mg(OH)2/Mg-Al LDH

Insitu Grown Superhydrophobic Zn–Al Layered Double Hydroxides Films on Magnesium Alloy to Improve Corrosion Properties

Preparation and performance study of corrosion-resistant surfaces of magnesium alloys

Study on the preparation and corrosion resistance of hydroxyapatite/stearic acid superhydrophobic composite coating on magnesium alloy surface

Fabrication Of A Superhydrophobic Film With Self-Cleaning Property On Magnesium Alloy And Its Corrosion Resistance Properties

In-situ Hydrothermal Crystallization Mg(OH)2 Films on Magnesium Alloy AZ91 and Their Corrosion Resistance Properties

Facile Fabrication and Properties of Super-hydrophobic MgAl-LDH Films With Excellent Corrosion Resistance on AZ31 Magnesium Alloy

Composite cerium oxide/titanium oxide thin films for corrosion protection of AZ91D magnesium alloy via sol-gel process

One-step hydrothermal preparation of corrosion-resistant coatings with microsphere structure

One-step Preparation of Silicate Coatings on AZ91D Magnesium Alloy Surface for Boosting its Corrosion Resistance

Mitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion

Preparing Superhydrophobic Nanocomposite Coating with SiO2 Nanoparticles on Magnesium Alloy

Preparation of Biomimetic Hydrophobic Coatings on AZ91D Magnesium Alloy Surface

Fabrication of Superhydrophobic Coating on Magnesium Alloy with Improved Corrosion Resistance by Combining Micro-Arc Oxidation and Cyclic Assembly

Corrosion Resistance of Silane-Modified Hydroxide Zinc Carbonate Film on AZ31 Magnesium Alloy

Eco-Friendly Fabrication of Composite Superhydrophobic Coating Via Deep Eutectic Solvent Pretreatment for the Corrosion Protection of Magnesium Alloys

Hydrothermal Synthesis of Protective Coating on Magnesium Alloy Using De-Ionized Water

Preparation of Superhydrophobic Silica Film on Mg–Nd–Zn–Zr Magnesium Alloy with Enhanced Corrosion Resistance by Combining Micro-Arc Oxidation and Sol–gel Method