Abstract:Gasification, a highly efficient method, is under extensive investigation due to its potential to convert biomass and plastic waste into eco-friendly energy sources and valuable fuels. Nevertheless, there exists a gap in comprehension regarding the integrated thermochemical process of polystyrene (PS) and polypropylene (PP) and its capability to produce hydrogen (H 2 ) fuel. In this study a comprehensive process simulation using a quasi-equilibrium approach based on minimizing Gibbs free energy has been introduced. To enhance H 2 content, a water-gas shift (WGS) reactor and a pressure swing adsorption (PSA) unit were integrated for effective H 2 separation, increasing H 2 production to 27.81 kg/h. To investigate the operating conditions on the process the effects of three key variables in a gasification reactor namely gasification temperature, feedstock flow rate and gasification pressure have been explored using sensitivity analysis. Furthermore, several machine learning models have been utilized to discover and optimize maximum capacity of the process for H 2 production. The sensitivity analysis reveals that elevating the gasification temperature from 500 °C to 1200 °C results in higher production of H 2 up to 23 % and carbon monoxide (CO). However, generating H 2 above 900 °C does not lead to a significant upturn in process capacity. Conversely, an increase in pressure within the gasification reactor is shown to decrease the system capacity for generating both H 2 and CO. Moreover, increasing the mass flow rate of the gasifying agent to 250 kg/h in the gasification reactor has shown to be merely productive in process capacity for H 2 generation, almost a 5 % increase. Regarding pressure, the hydrogen yield decreases from 22.64 % to 17.4 % with an increase in pressure from 1 to 10 bar. It has been also revealed that gasification temperature has more predominant effect on Cold gas efficiency (CGE) compared to gasification pressure and Highest CGE Has been shown by PP at 1200 °C. Among the various machine learning models, Random Forest (RF) model demonstrates robust performance, achieving R 2 values exceeding 0.99.

Process design and techno-economic analysis of dual hydrogen and methanol production from plastics using energy integrated system

Simulation and Modelling of Hydrogen Production from Waste Plastics: Technoeconomic Analysis

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Integration of Methane Reforming and Chemical Looping Technologies for Power Generation from Waste Plastic: Technical and Economic Assessment

Development of a new renewable energy system for clean hydrogen and ethanol production

Techno-economic analysis and life cycle assessment of mixed plastic waste gasification for production of methanol and hydrogen

Development and evaluation of an integrated waste to energy system based on polyethylene plastic wastes pyrolysis for production of hydrogen fuel and other useful commodities

Hydrogen production from plastic waste: A comprehensive simulation and machine learning study

Process design and techno-economic analysis of the coproduction of oil, electricity, and protein from plastics and biomass using an integrated system

Advanced Design and Comparative Analysis of Methanol Production Routes from CO2 and Renewable H2: via Syngas vs. Direct Hydrogenation Processes

From Waste to Energy: Enhancing Fuel and Hydrogen Production through Pyrolysis and In-Line Reforming of Plastic Wastes

Conceptual Design Development of Coal-to-Methanol Process with Carbon Capture and Utilization

Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen

Comparative assessment on thermo-chemical conversion of different waste plastics to value added syngas: thermodynamic investigation

An Investigation of a Hybrid Plasma Gasification System for Various Waste Plastics Thermochemical Degradation in the Fuel Extraction Process

Sustainable Biomethanol and Biomethane Production via Anaerobic Digestion, Oxy-Fuel Gas Turbine and Amine Scrubbing CO2 Capture

Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming

Economic Appraisal and Enhanced Efficiency Optimization for Liquid Methanol Production Process

Hydrogen Production by Three-Stage (i) Pyrolysis, (ii) Catalytic Steam Reforming, and (iii) Water Gas Shift Processing of Waste Plastic

Efficient Recycling and Conversion of CO 2 to methanol: Process Design and Environmental Assessment